The PTD08D210W is a high-performance dual 10-A output, non-isolated digital PowerTrain? module. This module is the power conversion section of a digital power system which incorporates TI's UCD7242 MOSFET/driver IC. The PTD08D210W must be used in conjunction with a digital power controller such as the UCD9240, UCD9220 or UCD9110 family. The PTD08D210W receives control signals from the digital controller and provides parametric and status information back to the digital controller. Together, PowerTrain modules and a digital power controller form a sophisticated, robust, and easily configured power management solution.

Operating from an input voltage range of 4.75 V to 14 V, the PTD08D210W provides step-down power conversion to a wide range of output voltages from, 0.7 V to 3.6 V. The wide input voltage range makes the PTD08D210W particularly suitable for advanced computing and server applications that utilize a loosely regulated 8-V, 9.6-V or 12-V intermediate distribution bus. Additionally, the wide input voltage range increases design flexibility by supporting operation with tightly regulated 5-V or 12-V intermediate bus architectures.

The module incorporates output over-current and temperature monitoring which protects against most load faults. Output current and module temperature signals are provided for the digital controller to permit user defined over-current and over-temperature warning and fault scerarios.

The module uses single-sided, pin-less surface mount construction to provide a low profile and compact footprint. The package is lead (Pb) - free and RoHS

• Dual 10-A Outputs
• 4.75-V to 14-V Input Voltage
• Programmable Wide-Output Voltage (0.7 V to 3.6 V)
• Efficiencies up to 96%
• Digital I/O
  • PWM signal
  • Fault Flag (FF)
  • Sychronous Rectifier Enable (SRE)
• Analog I/O
  • Temperature
  • Output currrent
• Safety Agency Approvals: (Pending)
  • UL/IEC/CSA-C22.2 60950-1
• Operating Temperature: –40°C to 85°C
• APPLICATIONS
  • Digital Power Systems using UCD9XXX Digital Controllers

POWERTRAIN is a trademark of Texas Instruments.

• Iout (Max) (A)
• 10
• Vin (Min) (V)
• 4.75
• Vin (Max) (V)
• 14
• Vout (Min) (V)
• 0.7
• Vout (Max) (V)
• 3.6
• Features
• Overcurrent protection
• Regulated outputs (#)
• 1
• Switching frequency (Max) (kHz)
• 1000
• Switching frequency (Min) (kHz)
• 500
• Topology
• Buck

PTD08D210W的完整型号有：PTD08D210WAC、PTD08D210WACT，以下是这些产品的关键参数及官网采购报价：

PTD08D210WAC，工作温度：-40 to 85，封装：DIP MODULE (EFS)-22，包装数量MPQ：36个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：Call TI，TI官网PTD08D210WAC的批量USD价格：12.642（1000+）

PTD08D210WACT，工作温度：-40 to 85，封装：DIP MODULE (EFS)-22，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：Call TI，TI官网PTD08D210WACT的批量USD价格：12.642（1000+）

FUSION_DIGITAL_POWER_DESIGNER — Digital Power 软件

Fusion Digital Power图形用户界面 (GUI) 软件用于配置和监视精选的德州仪器 (TI) 数字电源控制器以及序列发生器/运行状况监视器。此应用程序使用 PMBus 协议通过 TI USB 适配器经由串行总线与器件进行通信。

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)