- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:直流/直流开关稳压器 - 降压稳压器
- 功能描述:22A 输出 3.3V 输入的宽输出电压调节插拔电源模块
- 点击这里打开及下载PTH03020W的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The PTH03020 series of non-isolated power modules offers OEM designers a combination of high performance, small footprint, and industry leading features. As part of a new class of power modules these products provide designers with the flexibility to power the most complex multi-processor digital systems using off-the-shelf catalog parts.
The series employs double-sided surface mount construction and provides high-performance step-down power conversion for up to 22 A of output current from a 3.3-V input bus voltage. The output voltage of the PTH03020W can be set to any value over the range, 0.8 V to 2.5 V, using a single resistor.
This series includes Auto-Track. Auto-Track simplifies the task of supply voltage sequencing in a power system by enabling modules to track each other, or any external voltage, during power up and power down.
Other operating features include an on/off inhibit, output voltage adjust (trim), and margin up/down controls. To ensure tight load regulation, an output voltage sense is also provided. A non-latching over-current trip and over-tempterature shutdown provide load fault protection.
Target applications include complex multi-voltage, multi-processor systems that incorporate the industrys high-speed DSPs, micro-processors and bus drivers.
- Up to 22-A Output Current
- 3.3-V Input Voltage
- Wide-Output Voltage Adjust (0.8 V to 2.5 V)
- Efficiencies up to 93%
- 120 W/in3 Power Density
- On/Off Inhibit
- Output Voltage Sense
- Pre-Bias Startup
- Margin Up/Down Controls
- Under-Voltage Lockout
- Auto-Track? Sequencing
- Output Over-Current Protection (Non-Latching, Auto-Reset)
- Over-Temperature Protection
- Operating Temp: –40 to +85°C
- IPC Lead Free 2
- Safety Agency Approvals: UL 1950, CSA 22.2 950, & EN60950 VDE (Pending)
- Point-of-load Alliance (POLA) Compatible
- Iout (Max) (A)
- 22
- Vin (Min) (V)
- 2.95
- Vin (Max) (V)
- 3.65
- Vout (Min) (V)
- 0.8
- Vout (Max) (V)
- 2.5
- Soft start
- Fixed
- Features
- Enable, Overcurrent protection, Tracking, Voltage Margining
- Iq (Typ) (uA)
- 100000
- Regulated outputs (#)
- 1
- Switching frequency (Max) (kHz)
- 340
- Switching frequency (Min) (kHz)
- 250
- Duty cycle (Max) (%)
- 100
- Topology
- Buck
PTH03020W的完整型号有:PTH03020WAH、PTH03020WAS、PTH03020WAST、PTH03020WAZ、PTH03020WAZT,以下是这些产品的关键参数及官网采购报价:
PTH03020WAH,工作温度:-40 to 85,封装:Through-Hole Module (EUK)-10,包装数量MPQ:20个,MSL 等级/回流焊峰值温度:N/A for Pkg Type,引脚镀层/焊球材料:SN,TI官网PTH03020WAH的批量USD价格:17.16(1000+)
PTH03020WAS,工作温度:-40 to 85,封装:Surface Mount Module (EUL)-10,包装数量MPQ:20个,MSL 等级/回流焊峰值温度:Level-1-235C-UNLIM/Level-3-260C-168HRS,引脚镀层/焊球材料:SNPB,TI官网PTH03020WAS的批量USD价格:17.16(1000+)
PTH03020WAST,工作温度:-40 to 85,封装:Surface Mount Module (EUL)-10,包装数量MPQ:200个,MSL 等级/回流焊峰值温度:Level-1-235C-UNLIM/Level-3-260C-168HRS,引脚镀层/焊球材料:SNPB,TI官网PTH03020WAST的批量USD价格:17.16(1000+)
PTH03020WAZ,工作温度:-40 to 85,封装:Surface Mount Module (EUL)-10,包装数量MPQ:20个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:SNAGCU,TI官网PTH03020WAZ的批量USD价格:17.16(1000+)
PTH03020WAZT,工作温度:-40 to 85,封装:Surface Mount Module (EUL)-10,包装数量MPQ:200个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:SNAGCU,TI官网PTH03020WAZT的批量USD价格:17.16(1000+)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)