The PTH04T240/241W is a high-performance 10-A rated, non-isolated power module. These modules represent the 2nd generation of the popular PTH series power modules and include a reduced footprint and additional features. The PTH04T241W is optimized to be used with all ceramic capacitors.

Operating from an input voltage range of 2.2 V to 5.5 V, the PTH04T240/241W requires a single resistor to set the output voltage to any value over the range, 0.69 V to 3.6 V. The wide input voltage range makes the PTH04T240/241W particularly suitable for advanced computing and server applications that utilize a 2.5-V, 3.3-V, or 5-V intermediate bus architecture.

The module incorporates a comprehensive list of features. Output over-current and over-temperature shutdown protects against most load faults. A differential remote sense ensures tight load regulation. An adjustable under-voltage lockout allows the turn-on voltage threshold to be customized. Auto-Tracksequencing is a popular feature that greatly simplifies the simultaneous power-up and power-down of multiple modules in a power system.

The PTH04T240/241W includes new patent pending technologies, TurboTrans and SmartSync. The TurboTrans feature optimizes the transient response of the regulator while simultaneously reducing the quantity of external output capacitors required to meet a target voltage deviation specification. Additionally, for a target output capacitor bank, TurboTrans can be used to significantly improve the regulators transient response by reducing the peak voltage deviation. SmartSync allows for switching frequency synchronization of multiple modules, thus simplifying EMI noise suppression tasks and reducing input capacitor RMS current requirements. The module uses double-sided surface mount construction to provide a low profile and compact footprint. Package options include both through-hole and surface mount configurations that are lead (Pb) - free and RoHS compatible.

• Up to 10-A Output Current
• 2.2-V to 5.5-V Input Voltage
• Wide-Output Voltage Adjust (0.69 V to 3.6 V)
• ±1.5% Total Output Voltage Variation
• Efficiencies up to 96%
• Output Overcurrent Protection (Nonlatching, Auto-Reset)
• Operating Temperature: -40°C to 85°C
• Safety Agency Approvals:
  • UL/IEC/CSA-C22.2 60950-1
• Prebias Startup
• On/Off Inhibit
• Differential Output Voltage Remote Sense
• Adjustable Undervoltage Lockout
• Auto-Track? Sequencing
• Ceramic Capacitor Version (PTH04T241W)
• TurboTrans? Technology
• Designed to meet Ultra-Fast TransientRequirements up to 300 A/μs
• SmartSync Technology
• APPLICATIONS
  • Complex Multi-Voltage Systems
  • Microprocessors
  • Bus Drivers

TurboTrans, TMS320 are trademarks of Texas Instruments.

• Iout (Max) (A)
• 10
• Vin (Min) (V)
• 2.2
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 0.69
• Vout (Max) (V)
• 3.6
• Soft start
• Fixed
• Features
• TurboTrans
• Iq (Typ) (uA)
• 100000
• Regulated outputs (#)
• 1
• Switching frequency (Max) (kHz)
• 400
• Switching frequency (Min) (kHz)
• 240
• Duty cycle (Max) (%)
• 100
• Topology
• Buck

PTH04T241W的完整型号有：PTH04T241WAD、PTH04T241WAS、PTH04T241WAST、PTH04T241WAZ、PTH04T241WAZT，以下是这些产品的关键参数及官网采购报价：

PTH04T241WAD，工作温度：-40 to 85，封装：Through-Hole Module (EAY)-11，包装数量MPQ：49个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SN，TI官网PTH04T241WAD的批量USD价格：10.78（1000+）

PTH04T241WAS，工作温度：-40 to 85，封装：Surface Mount Module (EAZ)-11，包装数量MPQ：49个，MSL 等级/回流焊峰值温度：Level-1-235C-UNLIM/Level-3-260C-168HRS，引脚镀层/焊球材料：SNPB，TI官网PTH04T241WAS的批量USD价格：10.78（1000+）

PTH04T241WAST，工作温度：-40 to 85，封装：Surface Mount Module (EAZ)-11，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-235C-UNLIM/Level-3-260C-168HRS，引脚镀层/焊球材料：SNPB，TI官网PTH04T241WAST的批量USD价格：10.78（1000+）

PTH04T241WAZ，工作温度：-40 to 85，封装：Surface Mount Module (BAZ)-11，包装数量MPQ：49个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网PTH04T241WAZ的批量USD价格：10.78（1000+）

PTH04T241WAZT，工作温度：-40 to 85，封装：Surface Mount Module (BAZ)-11，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网PTH04T241WAZT的批量USD价格：10.78（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

T2-SW — T2 Online Tool to Assist in Choosing Proper TurboTrans Resistor & Amount of Output Capacitance