PTH05060Y_TI 用于 DDR/QDR 存储器的 10A 输出 5V 输入的总线终端电源模块

PTH05060Y的基本参数

制造厂商：TI
产品类别：电源管理
技术类目：直流/直流开关稳压器 - 降压稳压器
功能描述：用于 DDR/QDR 存储器的 10A 输出 5V 输入的总线终端电源模块
点击这里打开及下载PTH05060Y的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

PTH05060Y的产品详情：

The PTHxx060Y are a series of ready-to-use switching regulator modules from Texas Instruments designed specifically for bus termination in DDR and QDR memory applications. Operating from either a 3.3-V, 5-V or 12-V input, the modules generate a V_TT output that will source or sink up to 10 A of current to accurately track their V_REF input. V_TT is the required bus termination supply voltage, and V_REF is the reference voltage for the memory and chipset bus receiver comparators. V_REF is usually set to half the V_DDQ power supply voltage.

Both the PTHxx060Y series employs an actively switched synchronous rectifier output to provide state-of-the-art stepdown switching conversion. The products are small in size (1 in × 0.62 in), and are an ideal choice where space, performance, and high efficiency are desired, along with the convenience of a ready-to-use module.

Operating features include an on/off inhibit and output over-current protection (source mode only). The on/off inhibit feature allows the V_TT bus to be turned off to save power in a standby mode of operation. To ensure tight load regulation, an output remote sense is also provided. Package options include both throughhole and surface mount configurations.

PTH05060Y的优势和特性：

VTT Bus Termination Output (Output Tracks the System VREF)
10 A Output Current
3.3-V, 5-V or 12-V Input Voltage
DDR and QDR Compatible
On/Off Inhibit (for VTT Standby)
Under-Voltage Lockout
Operating Temp: –40 to +85°C
Efficiencies up to 91 %
Output Overcurrent Protection (Non-Latching, Auto-Reset)
57 W/in3 Power Density
Safety Agency Approvals: UL/cUL60950, EN60950, VDE
Point-of-Load Alliance (POLA?) Compatible

POLA is a trademark of Texas Instruments.

PTH05060Y的参数（英文）：

Iout (Max) (A)
10
Vin (Min) (V)
4.5
Vin (Max) (V)
5.5
Vout (Min) (V)
0.55
Vout (Max) (V)
1.8
Soft start
Fixed
Features
Enable, Overcurrent protection, Tracking
Iq (Typ) (uA)
10000
Regulated outputs (#)
1
Switching frequency (Max) (kHz)
350
Switching frequency (Min) (kHz)
250
Duty cycle (Max) (%)
100
Topology
Buck

PTH05060Y具体的完整产品型号参数及价格（美元）：

PTH05060Y的完整型号有：PTH05060YAH、PTH05060YAS，以下是这些产品的关键参数及官网采购报价：

PTH05060YAH，工作温度：-40 to 85，封装：Through-Hole Module (EUW)-10，包装数量MPQ：36个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SN，TI官网PTH05060YAH的批量USD价格：12.792（1000+）

PTH05060YAS，工作温度：-40 to 85，封装：Surface Mount Module (EUY)-10，包装数量MPQ：36个，MSL 等级/回流焊峰值温度：Level-1-235C-UNLIM/Level-3-260C-168HRS，引脚镀层/焊球材料：SNPB，TI官网PTH05060YAS的批量USD价格：12.792（1000+）

PTH05060Y的评估套件：

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

PTH05060Y的电路图解：

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PTH05060Y的评估套件：

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice