The PTH08T250W device is a high-performance 50-A rated, non-isolated power module. This module represents the 2nd generation of the popular PTH series power modules with a reduced footprint and improved features.

Operating from an input voltage range of 4.5 V to 14 V, the device requires a single resistor to set the output voltage to any value over the range of 0.7 V to 3.6 V. The wide input voltage range makes the this device particularly suitable for advanced computing and server applications that utilize a loosely regulated 8-V to 12-V intermediate distribution bus. Additionally, the wide input voltage range increases design flexibility by supporting operation with tightly regulated 5-V, 8-V, or 12-V intermediate bus architectures. The module incorporates a comprehensive list of features. Output overcurrent and overtemperature shutdown protects against most load faults. A differential remote sense ensures tight load regulation. An adjustable undervoltage lockout allows the turnon voltage threshold to be customized. Auto-Track sequencing is a popular feature that greatly simplifies the simultaneous power-up and power-down of multiple modules in a power system. Additionally, the capability to current share between multiple PTH08T250W modules allows for load currents greater than 50 A on a single rail.

The device includes TurboTrans and the new patent-pending SmartSync technologies. The TurboTrans feature optimizes the transient response of the regulator while simultaneously reducing the quantity of external output capacitors required to meet a target voltage deviation specification. Additionally, for a target output capacitor bank, TurboTrans technology can be used to significantly improve the regulators transient response by reducing the peak voltage deviation. SmartSync technology allows for switching frequency synchronization of multiple modules, thus simplifying EMI noise suppression tasks and reducing input capacitor RMS current requirements.

R_SET is required to set the output voltage higher than 0.7 V. See the Electrical Characteristics table for more information.

Double-sided surface mount construction provides a low profile and compact footprint. Package options include both through-hole and surface mount configurations that are lead (Pb)-free and RoHS compatible.

• Up to 50-A output current
• 4.5-V to 14-V input voltage
• Wide-output voltage adjust (0.7 V to 3.6 V)
• ±1.5% Total output voltage variation
• Efficiencies up to 96%
• Output overcurrent protection (Nonlatching, auto-reset)
• Operating temperature: –40°C to 85°C
• Safety agency approvals:
  • UL/IEC/CSA-C22.2 60950-1
• Prebias start-up
• On/off inhibit
• Differential output voltage remote sense
• Adjustable undervoltage lockout
• Auto-Track? sequencing
• Multi-Phase, switch-mode topology
• TurboTrans technology
• Designed to meet ultra-fast transient Requirements up to 300 A/μs
• SmartSync technology
• Parallel operation
• POLA? compatible

• Iout (Max) (A)
• 50
• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 14
• Vout (Min) (V)
• 0.7
• Vout (Max) (V)
• 3.6
• Soft start
• Fixed
• Features
• Current Sharing, TurboTrans
• Iq (Typ) (uA)
• 100000
• Regulated outputs (#)
• 1
• Switching frequency (Max) (kHz)
• 750
• Switching frequency (Min) (kHz)
• 550
• Duty cycle (Max) (%)
• 100
• Topology
• Buck

PTH08T250W的完整型号有：PTH08T250WAD、PTH08T250WAS、PTH08T250WAST、PTH08T250WAZ、PTH08T250WAZT，以下是这些产品的关键参数及官网采购报价：

PTH08T250WAD，工作温度：-40 to 85，封装：Through-Hole Module (ECT)-22，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SN，TI官网PTH08T250WAD的批量USD价格：44.274（1000+）

PTH08T250WAS，工作温度：-40 to 85，封装：Surface Mount Module (ECU)-22，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-235C-UNLIM/Level-3-260C-168HRS，引脚镀层/焊球材料：SNPB，TI官网PTH08T250WAS的批量USD价格：44.274（1000+）

PTH08T250WAST，工作温度：-40 to 85，封装：Surface Mount Module (ECU)-22，包装数量MPQ：200个，MSL 等级/回流焊峰值温度：Level-1-235C-UNLIM/Level-3-260C-168HRS，引脚镀层/焊球材料：SNPB，TI官网PTH08T250WAST的批量USD价格：44.274（1000+）

PTH08T250WAZ，工作温度：-40 to 85，封装：Surface Mount Module (BCU)-22，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网PTH08T250WAZ的批量USD价格：44.274（1000+）

PTH08T250WAZT，工作温度：-40 to 85，封装：Surface Mount Module (BCU)-22，包装数量MPQ：200个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网PTH08T250WAZT的批量USD价格：44.274（1000+）

PTH08T250W Unencrypted PSpice Average Model Package (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

T2-SW — T2 Online Tool to Assist in Choosing Proper TurboTrans Resistor & Amount of Output Capacitance

The TurboTrans software allows the user to determine the T2 module best suited to their design parameters (Vin, Vout, Iout, Ambient Temperature, Airflow) as well as the proper amount of bulk output capacitance required to meet their transient requirements (both using TurboTrans as well as without (...)

TIDA-00582 — 100A 电流源参考设计

诸如德州仪器 (TI) PTH08T250W 的独立双相电源模块可提供高达 50A 的输出负载电流。但是，PTH08T250W 整合了 TI 的可堆叠控制器功能，此功能允许并联多个模块的输出，从而形成可靠的解决方案来提供 100 A 或更高的负载电流。