The REG711 is a switched capacitor voltage converter, which produces a regulated, low ripple output voltage from an unregulated input voltage. A wide input supply voltage of 1.8V to 5.5V makes the REG711 ideal for a variety of battery sources, such as single cell Li-Ion, or two and three cell Nickel or Alkaline based chemistries.

The input voltage may vary above and below the output voltage and the output will remain in regulation. It works equally well for step up or down without the need for an inductor, providing low EMI DC/DC conversion. The high switching frequency allows the use of small surface-mount capacitors, saving board space and reducing cost. The REG711 is thermally protected and current limited, protecting the load and the regulator during fault conditions. Typical ground pin current (quiescent current) is 1mA at full load, 60uA with no load, and less than 1uA in shutdown mode. This regulator comes in a thin MSOP-8 package with a component height of less than 1.1mm.

• WIDE INPUT RANGE: 1.8V TO 5.5V 5V VERSION: 2.7V TO 5.5V
• AUTOMATIC STEP-UP/STEP-DOWN OPERATION
• LOW INPUT CURRENT RIPPLE
• LOW OUTPUT VOLTAGE RIPPLE
• MINIMUM NUMBER OF EXTERNAL COMPONENTS\x97NO INDUCTORS
• 1MHz INTERNAL OSCILLATOR ALLOWS SMALL CAPACITORS
• "SHUTDOWN" MODE
• THERMAL AND CURRENT LIMIT PROTECTION
• FIVE OUTPUT VOLTAGES AVAILABLE: 5.0V, 3.3V, 3.0V, 2.7V, 2.5V
• THIN, SMALL PACKAGE: MSOP-8
• APPLICATIONS
  • SMART CARD READERS
  • CELLULAR PHONES
  • SIM CARD SUPPLIES
  • PORTABLE COMMUNICATION DEVICES
  • PERSONAL DIGITAL ASSISTANTS
  • MODEMS
  • NOTEBOOK AND PALM-TOP COMPUTERS
  • ELECTRONIC GAMES
  • HANDHELD METERS
  • PCMCIA CARDS
  • CARD BUSES
  • LCD DISPLAYS

• Vin (Min) (V)
• 2.7
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 5
• Vout (Max) (V)
• 5
• Iout (Max) (A)
• 0.05
• Regulated outputs (#)
• 1
• Switching frequency (Min) (kHz)
• 1000
• Switching frequency (Max) (kHz)
• 1000
• Iq (Typ) (mA)
• 0.06
• Features
• Enable
• Rating
• Catalog

REG711-5的完整型号有：REG711EA-5/250、REG711EA-5/2K5，以下是这些产品的关键参数及官网采购报价：

REG711EA-5/250，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：Call TI，TI官网REG711EA-5/250的批量USD价格：.452（1000+）

REG711EA-5/2K5，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：Call TI，TI官网REG711EA-5/2K5的批量USD价格：.377（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)