SN54HC161_TI 同步 4 位二进制计数器

SN54HC161的基本参数

制造厂商：TI
产品类别：逻辑和电压转换
技术类目：触发器、锁存器和寄存器 - 计数器
功能描述：同步 4 位二进制计数器
点击这里打开及下载SN54HC161的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

SN54HC161的产品详情：

These synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting designs. The ’HC161 devices are 4-bit binary counters. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when so instructed by the count-enable (ENP, ENT) inputs and internal gating. This mode of operation eliminates the output counting spikes that are normally associated with synchronous (ripple-clock) counters. A buffered clock (CLK) input triggers the four flip-flops on the rising (positive-going) edge of the clock waveform.

These counters are fully programmable; that is, they can be preset to any number between 0 and 9 or 15. As presetting is synchronous, setting up a low level at the load input disables the counter and causes the outputs to agree with the setup data after the next clock pulse, regardless of the levels of the enable inputs.

The clear function for the ’HC161 devices is asynchronous. A low level at the clear (CLR)\ input sets all four of the flip-flop outputs low, regardless of the levels of the CLK, load (LOAD)\, or enable inputs.

The carry look-ahead circuitry provides for cascading counters for n-bit synchronous applications without additional gating. Instrumental in accomplishing this function are ENP, ENT, and a ripple-carry output (RCO). Both ENP and ENT must be high to count, and ENT is fed forward to enable RCO. Enabling RCO produces a high-level pulse while the count is maximum (9 or 15 with Q_A high). This high-level overflow ripple-carry pulse can be used to enable successive cascaded stages. Transitions at ENP or ENT are allowed, regardless of the level of CLK.

These counters feature a fully independent clock circuit. Changes at control inputs (ENP, ENT, or LOAD\) that modify the operating mode have no effect on the contents of the counter until clocking occurs. The function of the counter (whether enabled, disabled, loading, or counting) is dictated solely by the conditions meeting the stable setup and hold times.

SN54HC161的优势和特性：

Wide Operating Voltage Range of 2 V to 6 V
Outputs Can Drive Up To 10 LSTTL Loads
Low Power Consumption, 80-μA Max ICC
Typical tpd = 14 ns
±4-mA Output Drive at 5 V
Low Input Current of 1 μA Max
Internal Look-Ahead for Fast Counting
Carry Output for n-Bit Cascading
Synchronous Counting
Synchronously Programmable

SN54HC161的参数（英文）：

Function
Counter
Bits (#)
4
Technology Family
HC
Supply voltage (Min) (V)
2
Supply voltage (Max) (V)
6
Input type
Standard CMOS
Output type
Push-Pull
Features
Balanced outputs, High speed (tpd 10-50ns), Positive input clamp diode

SN54HC161具体的完整产品型号参数及价格（美元）：

SN54HC161的完整型号有：84075012A、8407501EA、8407501FA、JM38510/66302BEA、M38510/66302BEA、SN54HC161J、SNJ54HC161FK、SNJ54HC161J、SNJ54HC161W，以下是这些产品的关键参数及官网采购报价：

84075012A，工作温度：-55 to 125，封装：LCCC (FK)-20，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网84075012A的批量USD价格：25.766（1000+）

8407501EA，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网8407501EA的批量USD价格：7.246（1000+）

8407501FA，工作温度：-55 to 125，封装：CFP (W)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网8407501FA的批量USD价格：22.58（1000+）

JM38510/66302BEA，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网JM38510/66302BEA的批量USD价格：28.681（1000+）

M38510/66302BEA，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网M38510/66302BEA的批量USD价格：28.681（1000+）

SN54HC161J，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网SN54HC161J的批量USD价格：7.115（1000+）

SNJ54HC161FK，工作温度：-55 to 125，封装：LCCC (FK)-20，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网SNJ54HC161FK的批量USD价格：25.766（1000+）

SNJ54HC161J，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网SNJ54HC161J的批量USD价格：7.246（1000+）

SNJ54HC161W，工作温度：-55 to 125，封装：CFP (W)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网SNJ54HC161W的批量USD价格：22.58（1000+）

SN54HC161的评估套件：

SN54HC161的电路图解：

SN54HC161的评估套件：