SN54LS169B_TI 同步 4 位加/减二进制计数器

SN54LS169B的基本参数

制造厂商：TI
产品类别：逻辑和电压转换
技术类目：触发器、锁存器和寄存器 - 计数器
功能描述：同步 4 位加/减二进制计数器
点击这里打开及下载SN54LS169B的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

SN54LS169B的产品详情：

These synchronous presettable counters feature an internal carry look-ahead for cascading in high speed counting applications. The 'LS169B and 'S169 are 4-bit binary counters. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when so instructed by the count-enable inputs and internal gating. This mode of operation helps eliminate the output counting spikes that are normally associated with asynchronous (ripple-clock) counters. A buffered clock input triggers the four master-slave flip-flops on the rising (positive-going) edge of the clock waveform.

These counters are fully programmable; that is the outputs may each be preset to either level. The load input circuitry allows loading with the carry-enable output of cascaded counters. As loading is synchronous, setting up a low level at the load input disables the counter and causes the outputs to agree with the data inputs after the next clock pulse.

The carry look-ahead circuitry provides for cascading counters for n-bit synchronous applications without additional gating. Instrumental in accomplishing this function are two count-enable inputs and a carry output. Both count enable inputs (ENP\, ENT\) must be low to count. The direction of the count is determined by the level of the up/down input. When the input is high, the counter counts up; when low, it counts down. Input ENT\ is fed forward to enable the carry output. The carry output thus enabled will produce a low-level output pulse with a duration approximately equal to the high portion of the Q_A output when counting up and approximately equal to the low portion of the Q_A output when counting down. This low-level overflow carry pulse can be used to enable successive cascaded stages. Transitions at the ENP\ or ENT\ inputs are allowed regardless of the level of the clock input. All inputs are diode-clamped to minimize transmission-line effects, thereby simplifying system design.

These counters feature a fully independent clock circuit. Changes at control inputs (ENP\, ENT\, LOAD\, U/D\) that will modify the operating mode have no effect until clocking occurs. The function of the counter (whether enabled, disabled, loading, or counting) will be dictated solely by the conditions meeting the stable setup and hold times.

SN54LS169B的优势和特性：

Programmable Look-Ahead Up/Down Binary Counters
Fully Synchronous Operation for Counting and Programming
Internal Look-Ahead for Fast Counting
Carry Output for n-Bit Cascading
Fully Independent Clock Circuit

SN54LS169B的参数（英文）：

Function
Counter
Bits (#)
4
Technology Family
LS
Supply voltage (Min) (V)
4.5
Supply voltage (Max) (V)
5.5
Input type
Bipolar
Output type
Push-Pull
Features
High speed (tpd 10-50ns)

SN54LS169B具体的完整产品型号参数及价格（美元）：

SN54LS169B的完整型号有：80018022A、8001802EA、8001802FA、SN54LS169BJ、SNJ54LS169BFK、SNJ54LS169BJ、SNJ54LS169BW，以下是这些产品的关键参数及官网采购报价：

80018022A，工作温度：-55 to 125，封装：LCCC (FK)-20，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网80018022A的批量USD价格：25.017（1000+）

8001802EA，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网8001802EA的批量USD价格：7.982（1000+）

8001802FA，工作温度：-55 to 125，封装：CFP (W)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网8001802FA的批量USD价格：14.35（1000+）

SN54LS169BJ，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网SN54LS169BJ的批量USD价格：8.337（1000+）

SNJ54LS169BFK，工作温度：-55 to 125，封装：LCCC (FK)-20，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网SNJ54LS169BFK的批量USD价格：25.017（1000+）

SNJ54LS169BJ，工作温度：-55 to 125，封装：CDIP (J)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网SNJ54LS169BJ的批量USD价格：7.982（1000+）

SNJ54LS169BW，工作温度：-55 to 125，封装：CFP (W)-16，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网SNJ54LS169BW的批量USD价格：14.35（1000+）

SN54LS169B的评估套件：

SN54LS169B的电路图解：

SN54LS169B的评估套件：