This high-speed translator/repeater is designed for signaling rates up to 1.5 Gbps to support various high-speed network routing applications. The driver output is compatible with current-mode logic (CML) levels, and directly drives 50- loads connected to 1.8-V, 2.5-V, or 3.3-V nominal supplies. The capability for direct connection to the loads may eliminate the need for coupling capacitors. The receiver input is compatible with LVDS (TIA/EIA–644), LVPECL, and CML signaling levels. The receiver tolerates a wide common-mode voltage range, and may also be directly coupled to the signal source. The internal data path from input to output is fully differential for low noise generation and low pulse-width distortion.

The V_BB pin is an internally generated voltage supply to allow operation with a single-ended LVPECL input. For single-ended LVPECL input operation, the unused differential input is connected to V_BB as a switching reference voltage. When used, decouple V_BB with a 0.01-uF capacitor and limit the current sourcing or sinking to 400 uA. When not used, V_BB should be left open.

This device is characterized for operation from –40°C to 85°C.

• Provides Level Translation From LVDS or LVPECL to CML, Repeating From CML to CML
• Signaling Rates1 up to 1.5 Gbps
• CML Compatible Output Directly Drives Devices With 3.3-V, 2.5-V, or 1.8-V Supplies
• Total Jitter < 70 ps
• Low 100 ps (Max) Part-To-Part Skew
• Wide Common-Mode Receiver Capability Allows Direct Coupling of Input Signals
• 25 mV of Receiver Input Threshold Hysteresis Over 0-V to 4-V Common-Mode Range
• Propagation Delay Times, 800 ps Maximum
• 3.3-V Supply Operation
• Available in SOIC and MSOP Packages
• APPLICATIONS
  • Level Translation
  • 622-MHz Central Office Clock Distribution
  • High-Speed Network Routing
  • Wireless Basestations
  • Low Jitter Clock Repeater

1 The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).

• Function
• Repeater, Translator
• Protocols
• CML, LVDS, LVPECL
• Number of transmitters
• 1
• Number of receivers
• 1
• Supply voltage (V)
• 3.3
• Signaling rate (Mbps)
• 1500
• Input signal
• CML, LVDS, LVPECL
• Output signal
• CML
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

SN65CML100的完整型号有：SN65CML100D、SN65CML100DGK、SN65CML100DGKR、SN65CML100DR，以下是这些产品的关键参数及官网采购报价：

SN65CML100D，工作温度：-40 to 85，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65CML100D的批量USD价格：1.848（1000+）

SN65CML100DGK，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：80个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65CML100DGK的批量USD价格：1.848（1000+）

SN65CML100DGKR，工作温度：-40 to 85，封装：VSSOP (DGK)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65CML100DGKR的批量USD价格：1.584（1000+）

SN65CML100DR，工作温度：-40 to 85，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65CML100DR的批量USD价格：1.584（1000+）

SN65CML100EVM — SN65CML100 评估模块]]

The EVM allows evaluation of operation of theSN65LVDS100/101 or SN65CML100 high-speed differential translators/repeaters.  Differential input signals (LVDS, LVPECL, CML, etc.) can be applied and the device output can beobserved across on board terminations, or via direct connection to 50-ohm (...)

SN65CML100 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)