The SN65HVD3x devices are 3-state differential line drivers and differential-input line receivers that operate with 3.3-V power supply.

Each driver and receiver has separate input and output pins for full-duplex bus communication designs. They are designed for RS-422 and RS-485 data transmission over cable lengths of up to 1500 meters.

The SN65HVD30, SN65HVD31, and SN65HVD32 devices are fully enabled with no external enabling pins.

The SN65HVD33, SN65HVD34, and SN65HVD35 devices have active-high driver enables and active-low receiver enables. A low, less than 1 µA, standby current can be achieved by disabling both the driver and receiver.

All devices are characterized for ambient temperatures from –40°C to 85°C. Low power dissipation allows operation at temperatures up to 105°C or 125°C, depending on package option.

• 1/8 Unit-Load Option Available (Up to 256Nodes on the Bus)
• Bus-Pin ESD Protection Exceeds 15-kV HBM
• Optional Driver Output Transition Times for Signaling Rates of 1Mbps, 5Mbps and 26Mbps
  • Line Signaling Rate is the Number of Voltage Transitions Made per Second Expressed in Units of bps (bits per second)
• Low-Current Standby Mode: <1 μA
• Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications
• 5-V Tolerant Inputs
• Bus Idle, Open, and Short-Circuit Failsafe
• Driver Current Limiting and Thermal Shutdown
• Designed for RS-422 and RS-485 Networks
• 5-V Devices Available, SN65HVD50-55

• Number of receivers
• 1
• Number of transmitters
• 1
• Duplex
• Full
• Supply voltage (Nom) (V)
• 3.3
• Signaling rate (Max) (Mbps)
• 5
• IEC 61000-4-2 contact (+/- kV)
• —
• Fault protection (V)
• -9 to 14
• Common mode range
• -7 to 12
• Number of nodes
• 256
• Isolated
• No
• ICC (Max) (mA)
• 6.4
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

SN65HVD31的完整型号有：SN65HVD31D、SN65HVD31DR，以下是这些产品的关键参数及官网采购报价：

SN65HVD31D，工作温度：-40 to 85，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65HVD31D的批量USD价格：1.76（1000+）

SN65HVD31DR，工作温度：-40 to 85，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65HVD31DR的批量USD价格：1.467（1000+）

RS485-FL-DPLX-EVM — RS485-FL-DPLX-EVM：RS-485 全双工评估模块

The RS-485 full-duplex evaluation module (EVM)helps designers evaluate device performance, supporting fast development and analysis of data transmission systems using any of the SN65HVD147x, SN65HVD179x, SN65HVD3x, SN65HVD5x and SN65HVD7x full-duplex transceivers in a 14-pin D package. The (...)

SN65HVD31 IBIS Model (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)