The SN65HVD5X devices are 3-state differential line drivers and differential-input line receivers that operate with a 5-V power supply. Each driver and receiver has separate input and output pins for full-duplex bus communication designs. They are designed for balanced transmission lines and interoperation with ANSI TIA/EIA-485A, TIA/EIA-422-B, ITU-T v.11 and ISO 8482:1993 standard-compliant devices.

The SN65HVD50, SN65HVD51, and SN65HVD52 are fully enabled with no external enabling pins.

The SN65HVD53, SN65HVD54, and SN65HVD55 have active-high driver enables and active-low receiver enables. A low, less than 1 µA, standby current is achieved by disabling both the driver and receiver.

All devices are characterized for operation from –40°C to 85°C.

The high output feature of the SN65HVD5x provides more noise margin than the typical RS-485 drivers. The extra noise margin makes applications in long cable and harsh noise environments possible.

• 1/8 Unit-Load Option Available (Up to 256 Nodes on the Bus)
• Bus-Pin ESD Protection Exceeds 15 kV HBM
• Optional Driver Output Transition Times for Signaling Rates(1) of 1 Mbps, 5 Mbps and 25 Mbps
• Low-Current Standby Mode < 1 μA
• Glitch-Free Power-Up and Power-Down Bus I/Os
• Bus Idle, Open, and Short Circuit Failsafe
• Designed for RS-422 and RS485 Networks
• 3.3-V Devices Available, SN65HVD30-35
• APPLICATIONS
  • Utility Meters
  • Chassis-to-Chassis Interconnects
  • DTE/DCE Interfaces
  • Industrial, Process, and Building Automation
  • Point-of-Sale (POS) Terminals and Networks

(1)The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).

• Number of receivers
• 1
• Number of transmitters
• 1
• Duplex
• Full
• Supply voltage (Nom) (V)
• 5
• Signaling rate (Max) (Mbps)
• 25
• IEC 61000-4-2 contact (+/- kV)
• —
• Fault protection (V)
• -9 to 14
• Common mode range
• -7 to 12
• Number of nodes
• 64
• Isolated
• No
• ICC (Max) (mA)
• 2.7
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

SN65HVD53的完整型号有：SN65HVD53D、SN65HVD53DR，以下是这些产品的关键参数及官网采购报价：

SN65HVD53D，工作温度：-40 to 85，封装：SOIC (D)-14，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65HVD53D的批量USD价格：1.76（1000+）

SN65HVD53DR，工作温度：-40 to 85，封装：SOIC (D)-14，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65HVD53DR的批量USD价格：1.467（1000+）

RS485-FL-DPLX-EVM — RS485-FL-DPLX-EVM：RS-485 全双工评估模块

The RS-485 full-duplex evaluation module (EVM)helps designers evaluate device performance, supporting fast development and analysis of data transmission systems using any of the SN65HVD147x, SN65HVD179x, SN65HVD3x, SN65HVD5x and SN65HVD7x full-duplex transceivers in a 14-pin D package. The (...)

SN65HVD53 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)