The SN65LVDS84AQ FlatLink™ transmitter contains three 7-bit parallel-load serial-out shift registers, and four low-voltage differential signaling (LVDS) line drivers in a single integrated circuit. These functions allow 21 bits of single-ended LVTTL data to be synchronously transmitted over 3 balanced-pair conductors for receipt by a compatible receiver, such as the SN75LVDS82 or SN75LVDS86/86A.

When transmitting, data bits D0–D20 are each loaded into registers of the SN65LVDS84AQ upon the falling edge. The internal PLL is frequency-locked to CLKIN and then used to unload the data registers in 7-bit slices. The three serial streams and a phase-locked clock (CLKOUT) are then output to LVDS output drivers. The frequency of CLKOUT is the same as the input clock, CLKIN.

The SN65LVDS84AQ requires no external components and little or no control. The data bus appears the same at the input to the transmitter and output of the receiver with the data transmission transparent to the user(s). The only user intervention is the possible use of the shutdown/clear (SHTDN) active-low input to inhibit the clock and shut off the LVDS output drivers for lower power consumption. A low-level on this signal clears all internal registers to a low level.

The SN65LVDS84AQ is characterized for operation over the full automotive temperature range of –40°C to 125°C.

• 21:3 Data Channel Compression at up to 196 Mbytes/s Throughput
• Suited for SVGA, XGA, or SXGA Data Transmission From Controller to Display With Very Low EMI
• 21 Data Channels Plus Clock In Low-Voltage TTL Inputs and 3 Data Channels Plus Clock Out Low-Voltage Differential Signaling (LVDS) Outputs
• Operates From a Single 3.3-V Supply and 89 mW (Typ)
• Packaged in Thin Shrink Small-Outline Package (TSSOP) With 20-Mil Terminal Pitch
• Consumes Less Than 0.54 mW When Disabled
• Wide Phase-Lock Input Frequency Range: 31 MHz to 75 MHz
• No External Components Required for PLL
• Outputs Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard
• SSC Tracking Capability of 3% Center Spread at 50-kHz Modulation Frequency
• Improved Replacement for SN75LVDS84 and NSC DS90CF363A 3-V Device
• Qualified for Automotive Applications

• Function
• Serializer
• Color depth (bpp)
• 18
• Input compatibility
• LVCMOS
• Pixel clock frequency (Max) (MHz)
• 75
• Output compatibility
• LVDS
• Features
• Capable to Drive up to 10 meters STP Cable
• EMI reduction
• SSC Compatible
• Operating temperature range (C)
• -40 to 125

SN65LVDS84AQ-Q1的完整型号有：SN65LVDS84AQDGGRQ1，以下是这些产品的关键参数及官网采购报价：

SN65LVDS84AQDGGRQ1，工作温度：-40 to 125，封装：TSSOP (DGG)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN65LVDS84AQDGGRQ1的批量USD价格：2.46（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)