The SN65LVDT14 combines one LVDS line driver with four terminated LVDS line receivers in one package. It is designed to be used at the Memory Stick™ end of an LVDS-based Memory Stick interface extension.

The SN65LVDT41 combines four LVDS line drivers with a single terminated LVDS line receiver in one package. It is designed to be used at the host end of an LVDS-based Memory Stick interface extension.

• Controlled Baseline
  • One Assembly/Test Site, One Fabrication Site
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree
• Integrated 110- Nominal Receiver Line Termination Resistor
• Operate From a Single 3.3-V Supply
• Greater Than 125-Mbps Data Rate
• Flow-Through Pinout
• LVTTL-Compatible Logic I/Os
• ESD Protection on Bus Pins Exceeds 12 kV
• Meet or Exceed Requirements of ANSI/TIA/EIA-644A Standard for LVDS
• 20-Pin Thin Shrink Small-Outline Package (PW) With 26-Mil Terminal Pitch
• APPLICATIONS
  • Memory Stick? Interface Extensions With Long Interconnects Between Host and Memory Stick
  • Serial Peripheral Interface? (SPI?) Interface Extension to Allow Long Interconnects Between Master and Slave
  • MultiMediaCard? (MMC) Interface in SPI Mode
  • General-Purpose Asymmetric Bidirectional Communication

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. Serial Peripheral Interface, SPI are trademarks of Motorola. MultiMediaCard is a trademark of MultiMediaCard Association. Memory Stick is a trademark of Sony.

• Function
• Transceiver
• Protocols
• LVDS
• Number of transmitters
• 1
• Number of receivers
• 4
• Supply voltage (V)
• 3.3
• Signaling rate (Mbps)
• 125
• Input signal
• LVDS, LVTTL
• Output signal
• LVDS, LVTTL
• Rating
• HiRel Enhanced Product
• Operating temperature range (C)
• -40 to 125

SN65LVDT14-EP的完整型号有：SN65LVDT14QPWREP、V62/05615-01XE，以下是这些产品的关键参数及官网采购报价：

SN65LVDT14QPWREP，工作温度：-40 to 125，封装：TSSOP (PW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65LVDT14QPWREP的批量USD价格：5.993（1000+）

V62/05615-01XE，工作温度：-40 to 125，封装：TSSOP (PW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网V62/05615-01XE的批量USD价格：5.993（1000+）

SN65LVDT14 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)