The SN65MLVD128 and SN65MLVD129 are LVTTL-to-M.LVDS translators/repeaters. Outputs comply with the M.LVDS standard (TIA/EIA-899) and are optimized for data rates up to 250 Mbps, and clock frequencies up to 125 MHz. The driver outputs have been designed to support multipoint buses presenting loads as low as 30 and incorporates controlled transition times for backbone operation.

M-LVDS compliant devices allow for 32 nodes on a common bus, providing a high-speed replacement for RS-485 devices when lower common-mode voltage range and lower output signaling levels are acceptable. The SN65MLVD128 and SN65MLVD129 provide separate driver enables, allowing for independent control of each output signal.

Intended applications for these devices include transmission of clock signals from a central clock module, as well as translation and buffering of data or control signals for transmission through a controlled impedance backplane or cable.

• LVTTL Receiver and Eight Line Drivers Configured as an 8-Port M-LVDS Repeater—SN65MLVD128
• 2 LVTTL Receivers and Eight Line Drivers Configured as Dual 4-Port M-LVDS Repeaters—SN65MLVD129
• Drivers Meet or Exceed the M-LVDS Standard (TIA/EIA-899)
• Low-Voltage Differential 30- Line Drivers for Data Rates1 Up to 250 Mbps or Clock Frequencies Up to 125 MHz
• Power Up/Down Glitch Free
• Controlled Driver Output Voltage Transition Times for Improved Signal Quality
• Bus Pins High Impedance When Disabled or VCC ≤ 1.5 V
• Independent Enables for each Driver
• Output-to-Ouput Skew tsk(o) ≤ 160 ps Part-to-Part Skew tsk(pp) ≤ 800 ps
• Single 3.3-V Voltage Supply
• Bus Pin ESD Protection Exceeds 9 kV
• Packaged in 48-Pin TSSOP (DGG)
• APPLICATIONS
  • AdvancedTCA? (ATCA?) Clock Bus Driver
  • Clock Distribution
  • Data and Clock Repeating Over Backplanes and Cables
  • Cellular Base Stations
  • Central Office Switches
  • Network Switches and Routers

1The data rate of a line, is the number of voltage transitions that are made per second expressed in the units bps (bits per second). AdvancedTCA and ATCA are trademarks of the PCI Industrial Computer Manufacturers Group.

• Function
• Repeater, Translator
• Protocols
• M-LVDS
• Number of transmitters
• 8
• Number of receivers
• 1
• Supply voltage (V)
• 3.3
• Signaling rate (Mbps)
• 250
• Input signal
• M-LVDS
• Output signal
• M-LVDS
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

SN65MLVD128的完整型号有：SN65MLVD128DGG、SN65MLVD128DGGR，以下是这些产品的关键参数及官网采购报价：

SN65MLVD128DGG，工作温度：-40 to 85，封装：TSSOP (DGG)-48，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN65MLVD128DGG的批量USD价格：2.957（1000+）

SN65MLVD128DGGR，工作温度：-40 to 85，封装：TSSOP (DGG)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN65MLVD128DGGR的批量USD价格：2.464（1000+）

SN65MLVD128 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)