The SN65MLVD203B device is a multipoint low-voltage differential signaling (M-LVDS) line driver and receiver which is optimized to operate at signaling rates up to 200 Mbps. This device has a robust 3.3-V driver and receiver in the standard QFN footprint for demanding industrial applications. The bus pins are robust to ESD events, with high levels of protection to human-body model and IEC contact discharge specifications.

The device combines a differential driver and a differential receiver (transceiver), which operates from a single 3.3-V supply. The transceiver is optimized to operate at signaling rates up to 200 Mbps.

The SN65MLVD203B has enhancements over similar devices. Improved features include a controlled slew rate on the driver output to help minimize reflections from unterminated stubs, resulting in better signal integrity. The devices are characterized for operation from –40°C to 125°C.

The SN65MLVD203B M-LVDS transceiver is part of the TI extensive M-LVDS portfolio.

• Compatible with the M-LVDS standard TIA/EIA-899 for multipoint data interchange
• Low-voltage differential 30-? to 55-? line driver and receiver for signaling rates(1) up to 200 Mbps, clock frequencies up to 100 MHz
  • Type-1 Receiver Incorporates 25 mV of Hysteresis
• Bus I/O Protection
  • ±8-kV HBM
  • ±8-kV IEC 61000-4-2 Contact discharge
• Controlled driver output voltage transition times for improved signal quality
• –1-V to 3.4-V Common-mode voltage range allows data transfer with 2 V of ground noise
• Bus pins high impedance when disabled or VCC ≤ 1.5 V
• 100-Mbps Device Available (SN65MLVD202B)
• Improved Alternatives to SN65MLVD203 (1)

(1)The signaling rate of a line is the number of voltage transitions that are made per second expressed in the bps of the unit (bits per second).

• Function
• Transceiver
• Protocols
• M-LVDS
• Number of transmitters
• 1
• Number of receivers
• 1
• Supply voltage (V)
• 3.3
• Signaling rate (Mbps)
• 200
• Input signal
• LVTTL, M-LVDS
• Output signal
• LVTTL, M-LVDS
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 125

SN65MLVD203B的完整型号有：SN65MLVD203BRUMR、SN65MLVD203BRUMT，以下是这些产品的关键参数及官网采购报价：

SN65MLVD203BRUMR，工作温度：-40 to 125，封装：WQFN (RUM)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65MLVD203BRUMR的批量USD价格：1.35（1000+）

SN65MLVD203BRUMT，工作温度：-40 to 125，封装：WQFN (RUM)-16，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN65MLVD203BRUMT的批量USD价格：1.62（1000+）

MLVD20XBEVM — SN65MLVD203B and SN65MLVD204B full-duplex and half-duplex multipoint LVDS (M-LVDS) evaluation module

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)