The SN65MLVD2 and SN65MLVD3 are single-channel M-LVDS receivers. These devices are designed in full compliance with the TIA/EIA-899 (M-LVDS) standard, which are optimized to operate at signaling rates up to 250 Mbps. Each receiver channel is controlled by a receive enable (RE). When RE = low, the corresponding channel is enabled; when RE = high, the corresponding channel is disabled.

The M-LVDS standard defines two types of receivers, designated as Type-1 and Type-2. Type-1 receivers (SN65MLVD2) have thresholds centered about zero with 25 mV of hysteresis to prevent output oscillations with loss of input; Type-2 receivers (SN65MLVD3) implement a failsafe by using an offset threshold. Receiver outputs are slew rate controlled to reduce EMI and crosstalk effects associated with large current surges.

The devices are characterized for operation from -40°C to 85°C.

• Low-Voltage Differential 30- Line Receivers for Signaling Rates(1) up to 250Mbps; Clock Frequencies up to 125MHz
• SN65MLVD2 Type-1 Receiver Incorporates 25 mV of Input Threshold Hysteresis
• SN65MLVD3 Type-2 Receiver Provides 100 mV Offset Threshold to Detect Open-Circuit and Idle-Bus Conditions
• Wide Receiver Input Common-Mode Voltage Range, -1 V to 3.4 V, Allows 2 V of Ground Noise
• Improved VIT (35 mV)
• Meets or Exceeds the M-LVDS Standard TIA/EIA-899 for Multipoint Topology
• High Input Impedance with Low Supply Voltage
• Bus-Pin HBM ESD Protection Exceeds 9 kV
• Packaged in 8-Pin SON (DRB) 70% Smaller Than 8-Pin SOIC
• APPLICATIONS
  • Parallel Multipoint Data and Clock Transmission via Backplanes and Cables
  • Cellular Base Stations
  • Central Office Switches
  • Network Switches and Routers

(1) The signaling rate of a line is the number of voltage transitions that are made per second, expressed in the units bps (bits per second).

• Function
• Receiver
• Protocols
• M-LVDS
• Number of transmitters
• 0
• Number of receivers
• 1
• Supply voltage (V)
• 3.3
• Signaling rate (Mbps)
• 250
• Input signal
• M-LVDS
• Output signal
• LVTTL
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

SN65MLVD3的完整型号有：SN65MLVD3DRBR、SN65MLVD3DRBT，以下是这些产品的关键参数及官网采购报价：

SN65MLVD3DRBR，工作温度：-40 to 85，封装：SON (DRB)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN65MLVD3DRBR的批量USD价格：.792（1000+）

SN65MLVD3DRBT，工作温度：-40 to 85，封装：SON (DRB)-8，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN65MLVD3DRBT的批量USD价格：.95（1000+）

SN65MLVD2-3EVM — SN65MLVD2-3EVM 评估模块

The SN65MLVD2 and SN65MLVD3 are single-channel M-LVDS receivers. These devices are designed in full compliance with the TIA/EIA-899 (M-LVDS) standard, which are optimized to operate at signaling rates up to250Mbps. Each receiver channel is controlled by a receive enable (/RE). When /RE = low, (...)

SN65MLVD2 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)