SN74ABT16245A-EP_TI 具有三态输出的增强型产品 16 位总线收发器

制造厂商：TI
产品类别：逻辑和电压转换
技术类目：缓冲器、驱动器和收发器 - 通用收发器
功能描述：具有三态输出的增强型产品 16 位总线收发器
点击这里打开及下载SN74ABT16245A-EP的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

SN74ABT16245A-EP的产品详情：

The SN74ABT16245A-EP is a 16-bit noninverting 3-state transceiver designed for synchronous two-way communication between data buses. The control-function implementation minimizes external timing
requirements.

This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.

When V_CC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impendance state above 2.1 V, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74ABT16245A-EP is characterized for operation from -55°C to 125°C.

SN74ABT16245A-EP的优势和特性：

Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree(1)
Member of the Texas Instruments Widebus? Family
State-of-the-Art EPIC-IIB? BiCMOS Design Significantly Reduces Power Dissipation
Typical VOLP (Output Ground Bounce) <: 1 V at VCC = 5 V, TA = 25°C
High-Impedance State During Power Up and Power Down
Distributed VCC and GND Pin Configuration Minimizes High-Speed Switching Noise
Flow-Through Architecture Optimizes PCB Layout
High-Drive Outputs (-32-mA IOH, 64-mA IOL)
Latch-Up Performance Exceeds 500 mA Per JESD 70
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Shrink Small-Outline (DL) Package

(1)Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. Widebus, EPIC-IIB are trademarks of Texas Instruments.

SN74ABT16245A-EP的参数（英文）：

IOL (Max) (mA)
64
IOH (Max) (mA)
-32
Technology Family
ABT
Rating
HiRel Enhanced Product
Operating temperature range (C)
-55 to 125

SN74ABT16245A-EP具体的完整产品型号参数及价格（美元）：

SN74ABT16245A-EP的完整型号有：CABT16245AMDLREP、V62/06609-01XE，以下是这些产品的关键参数及官网采购报价：

CABT16245AMDLREP，工作温度：-55 to 125，封装：SSOP (DL)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CABT16245AMDLREP的批量USD价格：1.665（1000+）

V62/06609-01XE，工作温度：-55 to 125，封装：SSOP (DL)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网V62/06609-01XE的批量USD价格：1.665（1000+）

SN74ABT16245A-EP的评估套件：

SN74ABT16245A-EP的电路图解：

SN74ABT16245A-EP的评估套件：