TI代理,常备极具竞争力的充足现货
TI哪些型号被关注? TI热门产品型号
SN74ABTE16246的基本参数
  • 制造厂商:TI
  • 产品类别:逻辑和电压转换
  • 技术类目:缓冲器、驱动器和收发器 - 通用收发器
  • 功能描述:具有三态输出和集电极开路输出的 11 位入射波开关总线收发器
  • 点击这里打开及下载SN74ABTE16246的技术文档资料
  • TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
快速报价,在行业拥有较高的知名度及影响力
SN74ABTE16246的产品详情:

The SN74ABTE16246 is an 11-bit noninverting transceiver designed for asynchronous two-way communication between buses. This device has open-collector and 3-state outputs. The device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so that the buses are effectively isolated. When OE\ is low, the device is active.

The B port has an equivalent 25- series output resistor to reduce ringing. Active bus-hold inputs on the B port hold unused or floating inputs at a valid logic level.

The A port provides for the precharging of the outputs via VCCBIAS, which establishes a voltage between 1.3 V and 1.7 V when VCC is not connected.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

SN74ABTE16246的优势和特性:
  • Member of the Texas Instruments Widebus? Family
  • Supports the VME64 ETL Specification
  • Reduced TTL-Compatible Input Threshold Range
  • High-Drive Outputs (IOH = –60 mA, IOL = 90 mA) Support Equivalent 25- Incident-Wave Switching
  • VCC BIAS Pin Minimizes Signal Distortion During Live Insertion
  • Internal Pullup Resistor on OE\ Keeps Outputs in High-Impedance State During Power Up or Power Down
  • Distributed VCC and GND Pins Minimize High-Speed Switching Noise
  • Equivalent 25- Series Damping Resistor on B Port
  • Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors

Widebus is a trademark of Texas Instruments.

SN74ABTE16246的参数(英文):
  • IOL (Max) (mA)
  • 90
  • IOH (Max) (mA)
  • -90
  • Technology Family
  • ABTE
  • Rating
  • Catalog
  • Operating temperature range (C)
  • -40 to 85
SN74ABTE16246具体的完整产品型号参数及价格(美元):

SN74ABTE16246的完整型号有:SN74ABTE16246DGGR、SN74ABTE16246DL、SN74ABTE16246DLR,以下是这些产品的关键参数及官网采购报价:

SN74ABTE16246DGGR,工作温度:-40 to 85,封装:TSSOP (DGG)-48,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ABTE16246DGGR的批量USD价格:5.435(1000+)

SN74ABTE16246DL,工作温度:-40 to 85,封装:SSOP (DL)-48,包装数量MPQ:25个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ABTE16246DL的批量USD价格:7.066(1000+)

SN74ABTE16246DLR,工作温度:-40 to 85,封装:SSOP (DL)-48,包装数量MPQ:1000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ABTE16246DLR的批量USD价格:5.979(1000+)

轻松满足您的TI芯片采购需求
SN74ABTE16246的评估套件:

SN74ABTE16246DGGR,工作温度:-40 to 85,封装:TSSOP (DGG)-48,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ABTE16246DGGR的批量USD价格:5.435(1000+)

SN74ABTE16246DL,工作温度:-40 to 85,封装:SSOP (DL)-48,包装数量MPQ:25个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ABTE16246DL的批量USD价格:7.066(1000+)

SN74ABTE16246DLR,工作温度:-40 to 85,封装:SSOP (DL)-48,包装数量MPQ:1000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ABTE16246DLR的批量USD价格:5.979(1000+)

TI代理|TI中国代理 - 国内领先的TI芯片采购平台
丰富的可销售TI代理库存,专业的销售团队可随时响应您的紧急需求,目标成为有价值的TI代理