- 制造厂商：TI
- 产品类别：逻辑和电压转换
- 技术类目：缓冲器、驱动器和收发器 - 反向缓冲器和驱动器
- 功能描述：具有三态输出的汽车类 8 通道、2V 至 6V 反相器
- 点击这里打开及下载SN74AC240-Q1的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
This octal buffer and line driver is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.
The SN74AC240 device is organized as two 4-bit buffers/drivers with separate output-enable (OE) inputs. When OE is low, the device passes inverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
- Qualified for Automotive Applications
- 2-V to 6-V VCC Operation
- Inputs Accept Voltages to 6 V
- Max tpd of 6.5 ns at 5 V
- Technology Family
- AC
- Supply voltage (Min) (V)
- 2
- Supply voltage (Max) (V)
- 6
- Number of channels (#)
- 8
- IOL (Max) (mA)
- 24
- IOH (Max) (mA)
- -24
- ICC (Max) (uA)
- 40
- Input type
- Standard CMOS
- Output type
- 3-State
- Features
- Balanced outputs, Very high speed (tpd 5-10ns), Input clamp diode
- Rating
- Automotive
SN74AC240-Q1的完整型号有：SN74AC240QPWRG4Q1、SN74AC240QPWRQ1，以下是这些产品的关键参数及官网采购报价：
SN74AC240QPWRG4Q1，工作温度：-40 to 125，封装：TSSOP (PW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AC240QPWRG4Q1的批量USD价格：.271（1000+）
SN74AC240QPWRQ1，工作温度：-40 to 125，封装：TSSOP (PW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AC240QPWRQ1的批量USD价格：.241（1000+）
14-24-LOGIC-EVM — 支持 14 到 24 引脚 PW、DB、D、DW、NS、DYY 和 DGV 封装的通用逻辑 EVM
该 EVM 设计用于支持采用 14 至 24 引脚 D、DW、DB、NS、PW、DYY 或 DGV 封装的任何逻辑器件。
