- 制造厂商：TI
- 产品类别：逻辑和电压转换
- 技术类目：触发器、锁存器和寄存器 - D 型触发器
- 功能描述：具有三态输出的增强型产品 16 位边沿触发式 D 型触发器
- 点击这里打开及下载SN74ACT16374-EP的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The SN74ACT16374Q-EP is a 16-bit edge-triggered D-type flip-flop with 3-state outputs, designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
This device can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs.
An output-enable (OE)\ input can be used to place the outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state provides the capability to drive bus lines in a bus-organized system, without need for interface or pullup components. OE\ does not affect the internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
- Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
- Extended Temperature Performance of –40°C to 125°C
- Enhanced Diminishing Manufacturing Sources (DMS) Support
- Enhanced Product Change Notification
- Qualification Pedigree
- Member of the Texas Instruments Widebus Family
- Inputs Are TTL-Voltage Compatible
- 3-State Bus Driving True Outputs
- Flow-Through Architecture Optimizes PCB Layout
- Distributed VCC and GND Pins Minimize High-Speed Switching Noise
Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, highly accelerated stress test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Widebus is a trademark of Texas Instruments.
- Number of channels (#)
- 16
- Technology Family
- ACT
- Supply voltage (Min) (V)
- 4.5
- Supply voltage (Max) (V)
- 5.5
- Input type
- Schmitt-Trigger
- Output type
- Push-Pull
- Clock Frequency (Max) (MHz)
- 65
- IOL (Max) (mA)
- 16
- IOH (Max) (mA)
- -16
- ICC (Max) (uA)
- 160
- Features
- Balanced outputs, Very high speed (tpd 5-10ns)
SN74ACT16374-EP的完整型号有：SN74ACT16374QDLREP、V62/03603-01XE，以下是这些产品的关键参数及官网采购报价：
SN74ACT16374QDLREP，工作温度：-40 to 125，封装：SSOP (DL)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74ACT16374QDLREP的批量USD价格：2.079（1000+）
V62/03603-01XE，工作温度：-40 to 125，封装：SSOP (DL)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网V62/03603-01XE的批量USD价格：2.079（1000+）
SN74ACT16374QDLREP，工作温度：-40 to 125，封装：SSOP (DL)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74ACT16374QDLREP的批量USD价格：2.079（1000+）
V62/03603-01XE，工作温度：-40 to 125，封装：SSOP (DL)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网V62/03603-01XE的批量USD价格：2.079（1000+）
