TI代理,常备极具竞争力的充足现货
TI哪些型号被关注? TI热门产品型号
SN74ACT573的基本参数
  • 制造厂商:TI
  • 产品类别:逻辑和电压转换
  • 技术类目:触发器、锁存器和寄存器 - D 型锁存器
  • 功能描述:具有三态输出的八路 D 类透明锁存器
  • 点击这里打开及下载SN74ACT573的技术文档资料
  • TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
快速报价,在行业拥有较高的知名度及影响力
SN74ACT573的产品详情:

These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The eight latches are D-type transparent latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs.

A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines in a bus-organized system without need for interface or pullup components.

(OE)\ does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, (OE)\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

SN74ACT573的优势和特性:
  • 4.5-V to 5.5-V VCC Operation
  • Inputs Accept Voltages to 5.5 V
  • Max tpd of 9.5 ns at 5 V
  • Inputs Are TTL-Voltage Compatible

SN74ACT573的参数(英文):
  • Number of channels (#)
  • 8
  • Technology Family
  • ACT
  • Supply voltage (Min) (V)
  • 4.5
  • Supply voltage (Max) (V)
  • 5.5
  • Input type
  • TTL-Compatible CMOS
  • Output type
  • 3-State
  • Clock Frequency (Max) (MHz)
  • 90
  • IOL (Max) (mA)
  • 24
  • IOH (Max) (mA)
  • -24
  • ICC (Max) (uA)
  • 40
  • Features
  • Balanced outputs, High speed (tpd 10-50ns), Positive input clamp diode, Flow-through pinout
SN74ACT573具体的完整产品型号参数及价格(美元):

SN74ACT573的完整型号有:SN74ACT573DBR、SN74ACT573DW、SN74ACT573DWR、SN74ACT573N、SN74ACT573NSR、SN74ACT573PW、SN74ACT573PWR,以下是这些产品的关键参数及官网采购报价:

SN74ACT573DBR,工作温度:-40 to 85,封装:SSOP (DB)-20,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ACT573DBR的批量USD价格:0.306(1000+)

SN74ACT573DW,工作温度:-40 to 85,封装:SOIC (DW)-20,包装数量MPQ:25个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ACT573DW的批量USD价格:0.332(1000+)

SN74ACT573DWR,工作温度:-40 to 85,封装:SOIC (DW)-20,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ACT573DWR的批量USD价格:0.277(1000+)

SN74ACT573N,工作温度:-40 to 85,封装:PDIP (N)-20,包装数量MPQ:20个,MSL 等级/回流焊峰值温度:N/A for Pkg Type,引脚镀层/焊球材料:NIPDAU,TI官网SN74ACT573N的批量USD价格:0.319(1000+)

SN74ACT573NSR,工作温度:-40 to 85,封装:SO (NS)-20,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ACT573NSR的批量USD价格:0.306(1000+)

SN74ACT573PW,工作温度:-40 to 85,封装:TSSOP (PW)-20,包装数量MPQ:70个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ACT573PW的批量USD价格:0.332(1000+)

SN74ACT573PWR,工作温度:-40 to 85,封装:TSSOP (PW)-20,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74ACT573PWR的批量USD价格:0.249(1000+)

轻松满足您的TI芯片采购需求
SN74ACT573的评估套件:

14-24-LOGIC-EVM — 支持 14 到 24 引脚 PW、DB、D、DW、NS、DYY 和 DGV 封装的通用逻辑 EVM

该 EVM 设计用于支持采用 14 至 24 引脚 D、DW、DB、NS、PW、DYY 或 DGV 封装的任何逻辑器件。

TI代理|TI中国代理 - 国内领先的TI芯片采购平台
丰富的可销售TI代理库存,专业的销售团队可随时响应您的紧急需求,目标成为有价值的TI代理