SN74AHC16374_TI 具有三态输出的 16 位边沿 D 类触发器

SN74AHC16374的基本参数

制造厂商：TI
产品类别：逻辑和电压转换
技术类目：触发器、锁存器和寄存器 - D 型触发器
功能描述：具有三态输出的 16 位边沿 D 类触发器
点击这里打开及下载SN74AHC16374的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

SN74AHC16374的产品详情：

The 'AHC16374 devices are 16-bit edge-triggered D-type flip-flops with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

These devices can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels at the data (D) inputs.

A buffered output-enable (OE\) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without need for interface or pullup components.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

OE\ does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

The SN54AHC16374 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74AHC16374 is characterized for operation from -40°C to 85°C.

SN74AHC16374的优势和特性：

Members of the Texas Instruments WidebusTM Family
EPICTM (Enhanced-Performance Implanted CMOS) Process
Operating Range 2-V to 5.5-V VCC
3-State Outputs Drive Bus Lines Directly
Distributed VCC and GND Pins Minimize High-Speed Switching Noise
Flow-Through Architecture Optimizes PCB Layout
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Package Options Include Plastic Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center Spacings

EPIC and Widebus are trademarks of Texas Instruments Incorporated.

SN74AHC16374的参数（英文）：

Number of channels (#)
16
Technology Family
AHC
Supply voltage (Min) (V)
2
Supply voltage (Max) (V)
5.5
Input type
Standard CMOS
Output type
3-State
Clock Frequency (Max) (MHz)
110
IOL (Max) (mA)
8
IOH (Max) (mA)
-8
ICC (Max) (uA)
40
Features
Balanced outputs, High speed (tpd 10-50ns), Over-voltage tolerant inputs

SN74AHC16374具体的完整产品型号参数及价格（美元）：

SN74AHC16374的完整型号有：SN74AHC16374DGGR、SN74AHC16374DGVR、SN74AHC16374DL、SN74AHC16374DLR，以下是这些产品的关键参数及官网采购报价：

SN74AHC16374DGGR，工作温度：-40 to 85，封装：TSSOP (DGG)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AHC16374DGGR的批量USD价格：.5（1000+）

SN74AHC16374DGVR，工作温度：-40 to 85，封装：TVSOP (DGV)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AHC16374DGVR的批量USD价格：.5（1000+）

SN74AHC16374DL，工作温度：-40 to 85，封装：SSOP (DL)-48，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AHC16374DL的批量USD价格：.7（1000+）

SN74AHC16374DLR，工作温度：-40 to 85，封装：SSOP (DL)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AHC16374DLR的批量USD价格：.6（1000+）

SN74AHC16374的评估套件：

SN74AHC16374的电路图解：

SN74AHC16374的评估套件：