SN74ALVCH16373_TI 具有三态输出的 16 位透明 D 型锁存器

制造厂商：TI
产品类别：逻辑和电压转换
技术类目：触发器、锁存器和寄存器 - D 型锁存器
功能描述：具有三态输出的 16 位透明 D 型锁存器
点击这里打开及下载SN74ALVCH16373的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

SN74ALVCH16373的产品详情：

This 16-bit transparent D-type latch is designed for 1.65-V to 3.6-V V_CC operation.

The SN74ALVCH16373 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. This device can be used as two 8-bit latches or one 16-bit latch. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs.

A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without need for interface or pullup components. OE\ does not affect internal operations of the latch. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

SN74ALVCH16373的优势和特性：

Member of the Texas Instruments Widebus? Family
Operates From 1.65 V to 3.6 V
Max tpd of 3.6 ns at 3.3 V
±24-mA Output Drive at 3.3 V
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)

Widebus is a trademark of Texas Instruments.

SN74ALVCH16373的参数（英文）：

Number of channels (#)
16
Technology Family
ALVC
Supply voltage (Min) (V)
1.65
Supply voltage (Max) (V)
3.6
Input type
Standard CMOS
Output type
3-State
Clock Frequency (Max) (MHz)
150
IOL (Max) (mA)
24
IOH (Max) (mA)
-24
ICC (Max) (uA)
40
Features
Balanced outputs, Very high speed (tpd 5-10ns), Over-voltage tolerant inputs, Bus-hold, Flow-through pinout

SN74ALVCH16373具体的完整产品型号参数及价格（美元）：

SN74ALVCH16373的完整型号有：SN74ALVCH16373DGGR、SN74ALVCH16373DL、SN74ALVCH16373DLR，以下是这些产品的关键参数及官网采购报价：

SN74ALVCH16373DGGR，工作温度：-40 to 85，封装：TSSOP (DGG)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74ALVCH16373DGGR的批量USD价格：.711（1000+）

SN74ALVCH16373DL，工作温度：-40 to 85，封装：SSOP (DL)-48，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74ALVCH16373DL的批量USD价格：.924（1000+）

SN74ALVCH16373DLR，工作温度：-40 to 85，封装：SSOP (DL)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74ALVCH16373DLR的批量USD价格：.782（1000+）

SN74ALVCH16373的评估套件：

SN74ALVCH16373的电路图解：

SN74ALVCH16373的评估套件：