- 制造厂商：TI
- 产品类别：逻辑和电压转换
- 技术类目：触发器、锁存器和寄存器 - D 型触发器
- 功能描述：双路正边沿触发式 D 型触发器
- 点击这里打开及下载SN74AUC2G80的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
This dual positive-edge-triggered D-type flip-flop is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation.
When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs.
NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
- Available in the Texas Instruments NanoFree? Package
- Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
- Ioff Supports Partial-Power-Down Mode Operation
- Sub-1-V Operable
- Max tpd of 1.9 ns at 1.8 V
- Low Power Consumption, 10-μA Max ICC
- ±8-mA Output Drive at 1.8 V
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
NanoFree is a trademark of Texas Instruments.
- Number of channels (#)
- 2
- Technology Family
- AUC
- Supply voltage (Min) (V)
- 0.8
- Supply voltage (Max) (V)
- 2.7
- Input type
- Standard CMOS
- Output type
- Push-Pull
- Clock Frequency (Max) (MHz)
- 275
- IOL (Max) (mA)
- 9
- IOH (Max) (mA)
- -9
- ICC (Max) (uA)
- 10
- Features
- Balanced outputs, Ultra high speed (tpd <5ns), Over-voltage tolerant inputs, Partial power down (Ioff)
SN74AUC2G80的完整型号有：SN74AUC2G80DCTR、SN74AUC2G80DCUR、SN74AUC2G80YZPR，以下是这些产品的关键参数及官网采购报价：
SN74AUC2G80DCTR，工作温度：-40 to 85，封装：SM8 (DCT)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AUC2G80DCTR的批量USD价格：.249（1000+）
SN74AUC2G80DCUR，工作温度：-40 to 85，封装：VSSOP (DCU)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AUC2G80DCUR的批量USD价格：.189（1000+）
SN74AUC2G80YZPR，工作温度：-40 to 85，封装：DSBGA (YZP)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网SN74AUC2G80YZPR的批量USD价格：.249（1000+）
5-8-LOGIC-EVM — 支持 5 至 8 引脚 DCK、DCT、DCU、DRL 和 DBV 封装的通用逻辑 EVM
灵活的 EVM 设计用于支持具有 5 至 8 引脚数且采用 DCK、DCT、DCU、DRL 或 DBV 封装的任何器件。
