The AUP family is TI’s premier solution to the industry’s low-power needs in battery-powered portable applications. This family ensures a very low static- and dynamic-power consumption across the entire V_CC range of 0.8 V to 3.6 V, resulting in an increased battery life. This product also maintains excellent signal integrity (see Figures 1 and 2).

The SN74AUP1G99 features configurable multiple functions with a 3-state output. This device has the input-disable feature, which allows floating input signals. The inputs and output are disabled when the output-enable (OE) input is high. When OE is low, the output state is determined by 16 patterns of 4-bit input. The user can choose the logic functions, such as MUX, AND, OR, NAND, NOR, XOR, XNOR, inverter, and buffer. All inputs can be connected to V_CC or GND.

This device functions as an independent gate with Schmitt-trigger inputs, which allows for slow input transition and better switching noise immunity at the input.

To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

NanoStar™ and NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

• Available in the Texas Instruments NanoFree? Package
• Low Static-Power Consumption (ICC = 0.9 μA Max)
• Low Dynamic-Power Consumption (Cpd = 5 pF Typ at 3.3 V)
• Low Input Capacitance (CI = 1.5 pF)
• Low Noise – Overshoot and Undershoot <10% of VCC
• Input-Disable Feature Allows Floating Input Conditions
• Ioff Supports Partial-Power-Down Mode Operation
• Includes Schmitt-Trigger Inputs
• Wide Operating VCC Range of 0.8 V to 3.6 V
• Optimized for 3.3-V Operation
• 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
• tpd = 7.4 ns Max at 3.3 V
• Suitable for Point-to-Point Applications
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Performance Tested Per JESD 22
  • 2000-V Human-Body Model (A114-B, Class II)
  • 200-V Machine Model (A115-A)
  • 1000-V Charged-Device Model (C101)

NanoFree Is a trademark of Texas Instruments.

• Technology Family
• AUP
• Supply voltage (Min) (V)
• 0.8
• Supply voltage (Max) (V)
• 3.6
• Number of channels (#)
• 1
• Inputs per channel
• 1
• IOL (Max) (mA)
• 4
• IOH (Max) (mA)
• -4
• Input type
• Schmitt-Trigger
• Output type
• 3-State
• Features
• Partial power down (Ioff), Over-voltage tolerant inputs, Output enable, Very high speed (tpd 5-10ns)
• Data rate (Max) (Mbps)
• 100
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

SN74AUP1G99的完整型号有：SN74AUP1G99DCTR、SN74AUP1G99DCTT、SN74AUP1G99DCUR、SN74AUP1G99DCUT、SN74AUP1G99YZPR，以下是这些产品的关键参数及官网采购报价：

SN74AUP1G99DCTR，工作温度：-40 to 85，封装：SM8 (DCT)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AUP1G99DCTR的批量USD价格：.166（1000+）

SN74AUP1G99DCTT，工作温度：-40 to 85，封装：SM8 (DCT)-8，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74AUP1G99DCTT的批量USD价格：.366（1000+）

SN74AUP1G99DCUR，工作温度：-40 to 85，封装：VSSOP (DCU)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网SN74AUP1G99DCUR的批量USD价格：.106（1000+）

SN74AUP1G99DCUT，工作温度：-40 to 85，封装：VSSOP (DCU)-8，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网SN74AUP1G99DCUT的批量USD价格：.306（1000+）

SN74AUP1G99YZPR，工作温度：-40 to 85，封装：DSBGA (YZP)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网SN74AUP1G99YZPR的批量USD价格：.166（1000+）

5-8-LOGIC-EVM — 支持 5 至 8 引脚 DCK、DCT、DCU、DRL 和 DBV 封装的通用逻辑 EVM

灵活的 EVM 设计用于支持具有 5 至 8 引脚数且采用 DCK、DCT、DCU、DRL 或 DBV 封装的任何器件。