- 制造厂商:TI
- 产品类别:逻辑和电压转换
- 技术类目:缓冲器、驱动器和收发器 - 同相缓冲器和驱动器
- 功能描述:具有三态输出的 2 通道、0.8V 至 3.6V 低功耗缓冲器
- 点击这里打开及下载SN74AUP2G126的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The AUP family is TIs premier solution to the industrys low-power needs in battery-powered portable applications. This family ensures a very low static and dynamic power consumption across the entire VCC range of 0.8 V to 3.6 V, resulting in an increased battery life. This product also maintains excellent signal integrity (see Figure 1 and Figure 2).
The SN74AUP2G126 is a dual bus driver/line driver with 3-state outputs, designed for 0.8-V to 3.6-V VCC operation. The outputs are disabled when the associated output-enable (OE) input is low. This device has the input-disable feature, which allows floating input signals.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
NanoStar™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
- Available in the Texas Instruments NanoStar? Package
- Low Static-Power Consumption (ICC = 0.9 μA Max)
- Low Dynamic-Power Consumption (Cpd = 4 pF Typ at 3.3 V)
- Low Input Capacitance (Ci = 1.5 pF Typ)
- Low Noise – Overshoot and Undershoot <10% of VCC
- Input-Disable Feature Allows Floating Input Conditions
- Ioff Supports Partial-Power-Down Mode Operation
- Input Hysteresis Allows Slow Input Transition and Better Switching Noise Immunity at Input
- Wide Operating VCC Range of 0.8 V to 3.6 V
- Optimized for 3.3-V Operation
- 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
- tpd = 9.9 ns Max at 3.3 V
- Suitable for Point-to-Point Applications
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
NanoStar is a trademark of Texas Instruments.
- Technology Family
- AUP
- Supply voltage (Min) (V)
- 0.8
- Supply voltage (Max) (V)
- 3.6
- Number of channels (#)
- 2
- IOL (Max) (mA)
- 4
- ICC (Max) (uA)
- 0.9
- IOH (Max) (mA)
- -4
- Input type
- Standard CMOS
- Output type
- 3-State
- Features
- Balanced outputs, Very high speed (tpd 5-10ns), Partial power down (Ioff), Over-voltage tolerant inputs
- Rating
- Catalog
SN74AUP2G126的完整型号有:SN74AUP2G126DCUR、SN74AUP2G126DQER、SN74AUP2G126RSER、SN74AUP2G126YFPR、SN74AUP2G126YZPR,以下是这些产品的关键参数及官网采购报价:
SN74AUP2G126DCUR,工作温度:-40 to 85,封装:VSSOP (DCU)-8,包装数量MPQ:3000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74AUP2G126DCUR的批量USD价格:.189(1000+)
SN74AUP2G126DQER,工作温度:-40 to 85,封装:X2SON (DQE)-8,包装数量MPQ:5000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAUAG,TI官网SN74AUP2G126DQER的批量USD价格:.198(1000+)
SN74AUP2G126RSER,工作温度:-40 to 85,封装:UQFN (RSE)-8,包装数量MPQ:5000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAUAG,TI官网SN74AUP2G126RSER的批量USD价格:.246(1000+)
SN74AUP2G126YFPR,工作温度:-40 to 85,封装:DSBGA (YFP)-8,包装数量MPQ:3000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SNAGCU,TI官网SN74AUP2G126YFPR的批量USD价格:.239(1000+)
SN74AUP2G126YZPR,工作温度:-40 to 85,封装:DSBGA (YZP)-8,包装数量MPQ:3000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SNAGCU,TI官网SN74AUP2G126YZPR的批量USD价格:.249(1000+)
5-8-LOGIC-EVM — 支持 5 至 8 引脚 DCK、DCT、DCU、DRL 和 DBV 封装的通用逻辑 EVM
灵活的 EVM 设计用于支持具有 5 至 8 引脚数且采用 DCK、DCT、DCU、DRL 或 DBV 封装的任何器件。