The SN74CB3T3253 is a high-speed TTL-compatible FET multiplexer/demultiplexer with low ON-state resistance (r_on), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks V_CC. The SN74CB3T3253 supports systems using 5-V TTL, 3.3-V LVTTL, and 2.5-V CMOS switching standards, as well as user-defined switching levels (see Figure 1).

The SN74CB3T3253 is organized as two 1-of-4 multiplexer/demultiplexers with separate output-enable (1OE\, 2OE\) inputs. The select (S0, S1) inputs control the data path of each multiplexer/demultiplexer. When OE\ is low, the associated multiplexer/demultiplexer is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the associated multiplexer/demultiplexer is OFF, and a high-impedance state exists between the A and B ports.

This device is fully specified for partial-power-down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

• Output Voltage Translation Tracks VCC
• Supports Mixed-Mode Signal Operation On All Data I/O Ports
  • 5-V Input Down To 3.3-V Output Level Shift With 3.3-V VCC
  • 5-V/3.3-V Input Down To 2.5-V Output Level Shift With 2.5-V VCC
• 5-V Tolerant I/Os With Device Powered-Up or Powered-Down
• Bidirectional Data Flow, With Near-Zero Propagation Delay
• Low ON-State Resistance (ron) Characteristics (ron = 5 Typical)
• Low Input/Output Capacitance Minimizes Loading (Cio(OFF) = 5 pF Typical)
• Data and Control Inputs Provide Undershoot Clamp Diodes
• Low Power Consumption (ICC = 20 μA Max)
• VCC Operating Range From 2.3 V to 3.6 V
• Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
• Control Inputs Can be Driven by TTL or 5-V/3.3-V CMOS Outputs
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Performance Tested Per JESD 22
  • 2000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
• Supports Digital Applications: Level Translation, USB Interface, Memory Interleaving, Bus Isolation
• Ideal for Low-Power Portable Equipment

• Configuration
• 4:1
• Number of channels (#)
• 2
• Power supply voltage - single (V)
• 2.5, 3.3
• Protocols
• Analog
• Ron (Typ) (Ohms)
• 5
• CON (Typ) (pF)
• 4
• ON-state leakage current (Max) (μA)
• 20
• Bandwidth (MHz)
• 100
• Operating temperature range (C)
• -40 to 85
• Features
• Powered-off protection, Signal path translation
• Input/output continuous current (Max) (mA)
• 128
• Rating
• Catalog

SN74CB3T3253的完整型号有：SN74CB3T3253D、SN74CB3T3253DBQR、SN74CB3T3253DGVR、SN74CB3T3253DR、SN74CB3T3253PW、SN74CB3T3253PWR，以下是这些产品的关键参数及官网采购报价：

SN74CB3T3253D，工作温度：-40 to 85，封装：SOIC (D)-16，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74CB3T3253D的批量USD价格：0.683（1000+）

SN74CB3T3253DBQR，工作温度：-40 to 85，封装：SSOP (DBQ)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN74CB3T3253DBQR的批量USD价格：0.626（1000+）

SN74CB3T3253DGVR，工作温度：-40 to 85，封装：TVSOP (DGV)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74CB3T3253DGVR的批量USD价格：0.569（1000+）

SN74CB3T3253DR，工作温度：-40 to 85，封装：SOIC (D)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74CB3T3253DR的批量USD价格：0.569（1000+）

SN74CB3T3253PW，工作温度：-40 to 85，封装：TSSOP (PW)-16，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74CB3T3253PW的批量USD价格：0.683（1000+）

SN74CB3T3253PWR，工作温度：-40 to 85，封装：TSSOP (PW)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74CB3T3253PWR的批量USD价格：0.569（1000+）

LEADED-ADAPTER1 — 用于快速测试 TI 5、8、10、16 和 24 引脚引线式封装的表面贴装转 DIP 接头适配器

EVM-LEADED1 板可对 TI 的常见引线式封装进行快速测试和电路板试验。该评估板具有足够的空间，可将 TI 的 D、DBQ、DCT、DCU、DDF、DGS、DGV 和 PW 表面贴装封装转换为 100mil DIP 接头。