- 制造厂商：TI
- 产品类别：开关与多路复用器
- 技术类目：模拟开关和多路复用器
- 功能描述：3.3V、1:1 (SPST)、单通道 FET 总线开关
- 点击这里打开及下载SN74CBTLV1G125的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The SN74CBTLV1G125 features a single high–speed line switch. The switch is disabled when the output–enable (OE) input is high.
This device is fully specified for partial–power–down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high–impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current–sinking capability of the driver.
- 5– Switch Connection Between Two Ports
- Rail–to–Rail Switching on Data I/O Ports
- Ioff Supports Partial–Power–Down Mode Operation
- Configuration
- 1:1 SPST
- Number of channels (#)
- 1
- Power supply voltage - single (V)
- 2.5, 3.3
- Protocols
- Analog
- Ron (Typ) (Ohms)
- 5
- ON-state leakage current (Max) (μA)
- 1
- Bandwidth (MHz)
- 200
- Operating temperature range (C)
- -40 to 85
- Features
- Powered-off protection
- Input/output continuous current (Max) (mA)
- 128
- Rating
- Catalog
SN74CBTLV1G125的完整型号有：SN74CBTLV1G125DBVR、SN74CBTLV1G125DCKR，以下是这些产品的关键参数及官网采购报价：
SN74CBTLV1G125DBVR，工作温度：-40 to 85，封装：SOT-23 (DBV)-5，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74CBTLV1G125DBVR的批量USD价格：.149（1000+）
SN74CBTLV1G125DCKR，工作温度：-40 to 85，封装：SC70 (DCK)-5，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74CBTLV1G125DCKR的批量USD价格：.149（1000+）
DIP-ADAPTER-EVM — DIP 适配器评估模块
借助 DIP-Adapter-EVM 加快运算放大器的原型设计和测试，该 EVM 有助于快速轻松地连接小型表面贴装 IC 并且价格低廉。您可以使用随附的 Samtec 端子板连接任何受支持的运算放大器，或者将这些端子板直接连接至现有电路。
DIP-Adapter-EVM 套件支持六种常用的业界通用封装，包括：
- D 和 U (SOIC-8)
- PW (TSSOP-8)
- DGK（MSOP-8、VSSOP-8）
- DBV（SOT23-6、SOT23-5 和 SOT23-3）
- DCK（SC70-6 和 SC70-5）
- DRL (SOT563-6)
