The GTL2010 provides ten NMOS pass transistors (Sn and Dn) with a common gate (G_REF) and a reference transistor (S_REF and D_REF). The low ON-state resistance of the switch allows connections to be made with minimal propagation delay. With no direction control pin required, the device allows bidirectional voltage translations any voltage (1 V to 5 V) to any voltage (1 V to 5 V).

When the Sn or Dn port is LOW, the clamp is in the ON state and a low-resistance connection exists between the Sn and Dn ports. Assuming the higher voltage is on the Dn port, when the Dn port is HIGH, the voltage on the Sn port is limited to the voltage set by the reference transistor (S_REF). When the Sn port is HIGH, the Dn port is pulled to V_CC by the pullup resistors.

All transistors in the GTL2010 have the same electrical characteristics, and there is minimal deviation from one output to another in voltage or propagation delay. This offers superior matching over discrete transistor voltage-translation solutions where the fabrication of the transistors is not symmetrical. With all transistors being identical, the reference transistor (S_REF/D_REF) can be located on any of the other ten matched Sn/Dn transistors, allowing for easier board layout. The translator transistors with integrated ESD circuitry provides excellent ESD protection.

• Provides Bidirectional Voltage Translation With No Direction Control Required
• Allows Voltage Level Translation From 1 V up to 5 V
• Provides Direct Interface With GTL, GTL+, LVTTL/TTL, and 5-V CMOS Levels
• Low On-State Resistance Between Input and Output Pins (Sn/Dn)
• Supports Hot Insertion
• No Power Supply Required — Will Not Latch Up
• 5-V-Tolerant Inputs
• Low Standby Current
• Flow-Through Pinout for Ease of Printed Circuit Board Trace Routing
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-4)
  • 1000-V Charged-Device Model (C101)
• APPLICATIONS
  • Bidirectional or Unidirectional Applications Requiring Voltage-Level Translation From Any Voltage (1 V to 5 V) to Any Voltage (1 V to 5 V)
  • Low Voltage Processor I2C Port Translation to 3.3-V and/or 5-V I2C Bus Signal Levels
  • GTL/GTL+ Translation to LVTTL/TTL Signal Levels

• Technology Family
• GTL
• Applications
• SDIO, MDIO, SMBus, PMBus
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

SN74GTL2010的完整型号有：SN74GTL2010PW、SN74GTL2010PWR，以下是这些产品的关键参数及官网采购报价：

SN74GTL2010PW，工作温度：-40 to 85，封装：TSSOP (PW)-24，包装数量MPQ：60个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74GTL2010PW的批量USD价格：0.888（1000+）

SN74GTL2010PWR，工作温度：-40 to 85，封装：TSSOP (PW)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74GTL2010PWR的批量USD价格：0.74（1000+）

14-24-LOGIC-EVM — 支持 14 到 24 引脚 PW、DB、D、DW、NS、DYY 和 DGV 封装的通用逻辑 EVM

该 EVM 设计用于支持采用 14 至 24 引脚 D、DW、DB、NS、PW、DYY 或 DGV 封装的任何逻辑器件。

14-24-NL-LOGIC-EVM — Generic 14 through 24 pin non-leaded package evaluation module

Flexible EVM designed to support any logic or translation device that has a BQA, BQB, RGY (14-24 pin), RSV, RJW, or RHL package.