- 制造厂商:TI
- 产品类别:逻辑和电压转换
- 技术类目:触发器、锁存器和寄存器 - 移位寄存器
- 功能描述:汽车类 8 位并联负载移位寄存器
- 点击这里打开及下载SN74HC165-Q1的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The SN74HC165 is an 8-bit parallel-load shift register that, when clocked, shift the data toward a serial (QH) output. Parallel-in access to each stage is provided by eight individual direct data (A-H) inputs that are enabled by a low level at the shift/load (SH/LD) input. The SN74HC165 also features a clock-inhibit (CLK INH) function and a complementary serial (QH) output.
Clocking is accomplished by a low-to-high transition of the clock (CLK) input while SH/LD is held high and CLK INH is held low. The functions of CLK and CLK INH are interchangeable. Since a low CLK and a low-to-high transition of CLK INH also accomplish clocking, CLK INH should be changed to the high level only while CLK is high. Parallel loading is inhibited when SH/LD is held high. While SH/LD is low, the parallel inputs to the register are enabled independently of the levels of the CLK, CLK INH, or serial (SER) inputs.
- Qualified for Automotive Applications
- ESD Protection Exceeds 1500 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
- Wide Operating Voltage Range of 2 V to 6 V
- Outputs Can Drive Up To 10 LSTTL Loads
- Low Power Consumption, 80-μA Max ICC
- Typical tpd = 13 ns
- ±4-mA Output Drive at 5 V
- Low Input Current of 1 μA Max
- Complementary Outputs
- Direct Overriding Load (Data) Inputs
- Gated Clock Inputs
- Parallel-to-Serial Data Conversion
- Configuration
- Parallel-in, Serial-out
- Bits (#)
- 8
- Technology Family
- HC
- Supply voltage (Min) (V)
- 2
- Supply voltage (Max) (V)
- 6
- Input type
- Standard CMOS
- Output type
- Push-Pull
- Clock Frequency (MHz)
- 24
- IOL (Max) (mA)
- 5.2
- IOH (Max) (mA)
- -5.2
- ICC (Max) (uA)
- 160
- Features
- Balanced outputs, High speed (tpd 10-50ns), Positive input clamp diode
SN74HC165-Q1的完整型号有:SN74HC165QDRQ1、SN74HC165QPWRG4Q1、SN74HC165QPWRQ1,以下是这些产品的关键参数及官网采购报价:
SN74HC165QDRQ1,工作温度:-40 to 125,封装:SOIC (D)-16,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74HC165QDRQ1的批量USD价格:.155(1000+)
SN74HC165QPWRG4Q1,工作温度:-40 to 125,封装:TSSOP (PW)-16,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74HC165QPWRG4Q1的批量USD价格:.174(1000+)
SN74HC165QPWRQ1,工作温度:-40 to 125,封装:TSSOP (PW)-16,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网SN74HC165QPWRQ1的批量USD价格:.155(1000+)
14-24-LOGIC-EVM — 支持 14 到 24 引脚 PW、DB、D、DW、NS、DYY 和 DGV 封装的通用逻辑 EVM
该 EVM 设计用于支持采用 14 至 24 引脚 D、DW、DB、NS、PW、DYY 或 DGV 封装的任何逻辑器件。