SN74LVC16374_TI 具有三态输出的 16 位边沿 D 类触发器

SN74LVC16374的基本参数

制造厂商：TI
产品类别：逻辑和电压转换
技术类目：触发器、锁存器和寄存器 - D 型触发器
功能描述：具有三态输出的 16 位边沿 D 类触发器
点击这里打开及下载SN74LVC16374的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

SN74LVC16374的产品详情：

This 16-bit edge-triggered D-type flip-flop is designed for 2.7-V to 3.6-V V_CC operation.

The SN74LVC16374 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. It can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs.

A buffered output-enable (OE\) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without need for interface or pullup components.

OE\ does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The SN74LVC16374 is characterized for operation from -40°C to 85°C.

SN74LVC16374的优势和特性：

Member of the Texas Instruments WidebusTM Family
EPICTM (Enhanced-Performance Implanted CMOS) Submicron Process
Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C
Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C
Latch-Up Performance Exceeds 250 mA Per JEDEC Standard JESD-17
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Package Options Include Plastic 300-mil Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) Packages
EPIC and Widebus are trademarks of Texas Instruments Incorporated.

SN74LVC16374的参数（英文）：

Number of channels (#)
16
Technology Family
LVC
Supply voltage (Min) (V)
2.7
Supply voltage (Max) (V)
3.6
Input type
Standard CMOS
Output type
3-State
Clock Frequency (Max) (MHz)
100
IOL (Max) (mA)
24
IOH (Max) (mA)
-24
ICC (Max) (uA)
40
Features
Balanced outputs, Very high speed (tpd 5-10ns), Over-voltage tolerant inputs

SN74LVC16374具体的完整产品型号参数及价格（美元）：

SN74LVC16374的完整型号有：SN74LVC16374DGGR、SN74LVC16374DL、SN74LVC16374DLR，以下是这些产品的关键参数及官网采购报价：

SN74LVC16374DGGR，工作温度：-40 to 85，封装：TSSOP (DGG)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVC16374DGGR的批量USD价格：.413（1000+）

SN74LVC16374DL，工作温度：-40 to 85，封装：SSOP (DL)-48，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVC16374DL的批量USD价格：.537（1000+）

SN74LVC16374DLR，工作温度：-40 to 85，封装：SSOP (DL)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVC16374DLR的批量USD价格：.454（1000+）

SN74LVC16374的评估套件：

SN74LVC16374的电路图解：

SN74LVC16374的评估套件：