SN74LVT240A_TI 具有 TTL 兼容型 CMOS 输入和三态输出的 8 通道、2.7V 至 3.6V 反相器

SN74LVT240A的基本参数

制造厂商：TI
产品类别：逻辑和电压转换
技术类目：缓冲器、驱动器和收发器 - 反向缓冲器和驱动器
功能描述：具有 TTL 兼容型 CMOS 输入和三态输出的 8 通道、2.7V 至 3.6V 反相器
点击这里打开及下载SN74LVT240A的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

SN74LVT240A的产品详情：

This octal buffer and line driver is designed specifically for low-voltage (3.3-V) V_CC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The SN74LVT240A is organized as two 4-bit buffer/line drivers with separate output-enable (OE)\ inputs. When OE\ is low, the device passes data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.

When V_CC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.

SN74LVT240A的优势和特性：

Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)
Supports Unregulated Battery Operation Down to 2.7 V
Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
Ioff and Power-Up 3-State Support Hot Insertion
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)

SN74LVT240A的参数（英文）：

Technology Family
LVT
Supply voltage (Min) (V)
2.7
Supply voltage (Max) (V)
3.6
Number of channels (#)
8
IOL (Max) (mA)
64
IOH (Max) (mA)
-32
ICC (Max) (uA)
5000
Input type
TTL-Compatible CMOS
Output type
3-State
Features
Ultra high speed (tpd <5ns), Partial power down (Ioff), Over-voltage tolerant inputs, Power up 3-state
Rating
Catalog

SN74LVT240A具体的完整产品型号参数及价格（美元）：

SN74LVT240A的完整型号有：SN74LVT240ADBR、SN74LVT240ADW、SN74LVT240ADWR、SN74LVT240ANSR、SN74LVT240APW、SN74LVT240APWR，以下是这些产品的关键参数及官网采购报价：

SN74LVT240ADBR，工作温度：-40 to 85，封装：SSOP (DB)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT240ADBR的批量USD价格：.373（1000+）

SN74LVT240ADW，工作温度：-40 to 85，封装：SOIC (DW)-20，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT240ADW的批量USD价格：.407（1000+）

SN74LVT240ADWR，工作温度：-40 to 85，封装：SOIC (DW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT240ADWR的批量USD价格：.339（1000+）

SN74LVT240ANSR，工作温度：-40 to 85，封装：SO (NS)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT240ANSR的批量USD价格：.373（1000+）

SN74LVT240APW，工作温度：-40 to 85，封装：TSSOP (PW)-20，包装数量MPQ：70个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT240APW的批量USD价格：.407（1000+）

SN74LVT240APWR，工作温度：-40 to 85，封装：TSSOP (PW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT240APWR的批量USD价格：.339（1000+）

SN74LVT240A的评估套件：

14-24-LOGIC-EVM — 支持 14 到 24 引脚 PW、DB、D、DW、NS、DYY 和 DGV 封装的通用逻辑 EVM

该 EVM 设计用于支持采用 14 至 24 引脚 D、DW、DB、NS、PW、DYY 或 DGV 封装的任何逻辑器件。

SN74LVT240A的电路图解：

SN74LVT240A的评估套件：