SN74LVT245B_TI 具有三态输出的 3.3V ABT 八路总线收发器

SN74LVT245B的基本参数

制造厂商：TI
产品类别：逻辑和电压转换
技术类目：缓冲器、驱动器和收发器 - 通用收发器
功能描述：具有三态输出的 3.3V ABT 八路总线收发器
点击这里打开及下载SN74LVT245B的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

SN74LVT245B的产品详情：

This octal bus transceiver is designed specifically for low-voltage (3.3-V) V_CC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The SN74LVT245B is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.

SN74LVT245B的优势和特性：

Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)
Supports Unregulated Battery Operation Down to 2.7 V
Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
Ioff and Power-Up 3-State Support Hot Insertion
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)

SN74LVT245B的参数（英文）：

IOL (Max) (mA)
64
IOH (Max) (mA)
-64
Technology Family
LVT
Rating
Catalog
Operating temperature range (C)
-40 to 85

SN74LVT245B具体的完整产品型号参数及价格（美元）：

SN74LVT245B的完整型号有：SN74LVT245BDBR、SN74LVT245BDW、SN74LVT245BDWR、SN74LVT245BNSR、SN74LVT245BPW、SN74LVT245BPWR、SN74LVT245BRGYR，以下是这些产品的关键参数及官网采购报价：

SN74LVT245BDBR，工作温度：-40 to 85，封装：SSOP (DB)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT245BDBR的批量USD价格：.309（1000+）

SN74LVT245BDW，工作温度：-40 to 85，封装：SOIC (DW)-20，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT245BDW的批量USD价格：.337（1000+）

SN74LVT245BDWR，工作温度：-40 to 85，封装：SOIC (DW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT245BDWR的批量USD价格：.281（1000+）

SN74LVT245BNSR，工作温度：-40 to 85，封装：SO (NS)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT245BNSR的批量USD价格：.309（1000+）

SN74LVT245BPW，工作温度：-40 to 85，封装：TSSOP (PW)-20，包装数量MPQ：70个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT245BPW的批量USD价格：.337（1000+）

SN74LVT245BPWR，工作温度：-40 to 85，封装：TSSOP (PW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT245BPWR的批量USD价格：.281（1000+）

SN74LVT245BRGYR，工作温度：-40 to 85，封装：VQFN (RGY)-20，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVT245BRGYR的批量USD价格：.295（1000+）

SN74LVT245B的评估套件：

14-24-LOGIC-EVM — 支持 14 到 24 引脚 PW、DB、D、DW、NS、DYY 和 DGV 封装的通用逻辑 EVM

该 EVM 设计用于支持采用 14 至 24 引脚 D、DW、DB、NS、PW、DYY 或 DGV 封装的任何逻辑器件。

14-24-NL-LOGIC-EVM — Generic 14 through 24 pin non-leaded package evaluation module

Flexible EVM designed to support any logic or translation device that has a BQA, BQB, RGY (14-24 pin), RSV, RJW, or RHL package.

SN74LVT245B的电路图解：

SN74LVT245B的评估套件：