SN74LVTH16245A_TI 具有三态输出的 3.3V ABT 16 位总线收发器

制造厂商：TI
产品类别：逻辑和电压转换
技术类目：缓冲器、驱动器和收发器 - 通用收发器
功能描述：具有三态输出的 3.3V ABT 16 位总线收发器
点击这里打开及下载SN74LVTH16245A的技术文档资料
TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格

SN74LVTH16245A的产品详情：

The 'LVTH16245A devices are 16-bit (dual-octal) noninverting 3-state transceivers designed for low-voltage (3.3-V) V_CC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The devices are designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports is always active and must have a logic HIGH or LOW level applied to prevent excess I_CC and I_CCZ.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

When V_CC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

These devices are fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.

SN74LVTH16245A的优势和特性：

Members of the Texas Instruments Widebus? Family
State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation
Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)
Support Unregulated Battery Operation Down to 2.7 V
Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
Distributed VCC and GND Pins Minimize High-Speed Switching Noise
Flow-Through Architecture Optimizes PCB Layout
Ioff and Power-Up 3-State Support Hot Insertion
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 500 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)

Widebus is a trademark of Texas Instruments.

SN74LVTH16245A的参数（英文）：

IOL (Max) (mA)
64
IOH (Max) (mA)
-64
Technology Family
LVT
Rating
Catalog
Operating temperature range (C)
-40 to 85

SN74LVTH16245A具体的完整产品型号参数及价格（美元）：

SN74LVTH16245A的完整型号有：SN74LVTH16245ADGGR、SN74LVTH16245ADGVR、SN74LVTH16245ADL、SN74LVTH16245ADLR，以下是这些产品的关键参数及官网采购报价：

SN74LVTH16245ADGGR，工作温度：-40 to 85，封装：TSSOP (DGG)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVTH16245ADGGR的批量USD价格：.434（1000+）

SN74LVTH16245ADGVR，工作温度：-40 to 85，封装：TVSOP (DGV)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVTH16245ADGVR的批量USD价格：.434（1000+）

SN74LVTH16245ADL，工作温度：-40 to 85，封装：SSOP (DL)-48，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVTH16245ADL的批量USD价格：.586（1000+）

SN74LVTH16245ADLR，工作温度：-40 to 85，封装：SSOP (DL)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN74LVTH16245ADLR的批量USD价格：.499（1000+）

SN74LVTH16245A的评估套件：

SN74LVTH16245A的电路图解：

SN74LVTH16245A的评估套件：