- 制造厂商：TI
- 产品类别：接口
- 技术类目：RS-485 和 RS-422 收发器
- 功能描述：三路差分收发器
- 点击这里打开及下载SN75LBC171的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The SN65LBC171 and SN75LBC171 are monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. Potential applications include serial or parallel data transmission, cabled peripheral buses with twin axial, ribbon, or twisted-pair cabling. These devices are suitable for FAST-20 SCSI and can transmit or receive data pulses as short as 25 ns, with skew less than 3 ns.
These devices combine three 3-state differential line drivers and three differential input line receivers, all of which operate from a single 5-V power supply.
The driver differential outputs and the receiver differential inputs are connected internally to form three differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus whenever the driver is disabled or VCC = 0. These ports feature a wide common-mode voltage range making the device suitable for party-line applications over long cable runs.
The SN75LBC171 is characterized for operation over the temperature range of 0°C to 70°C. The SN65LBC171 is characterized for operation over the temperature range of -40°C to 85°C.
- Three Differential Transceivers in One Package
- Signaling Rates1 Up to 30 Mbps
- Low Power and High Speed
- Designed for TIA/EIA-485, TIA/EIA-422, ISO 8482, and ANSI X3.277 (HVD SCSI Fast-20) Applications
- Common-Mode Bus Voltage Range -7Vto12 V
- ESD Protection on Bus Terminals Exceeds12 kV
- Driver Output Current up to ± 60 mA
- Thermal Shutdown Protection
- Driver Positive and Negative Current Limiting
- Power-Up, Power-Down Glitch-Free Operation
- Pin-Compatible With the SN75ALS171
- Available in Shrink Small-Outline Package
1The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).
- Number of receivers
- 3
- Number of transmitters
- 3
- Duplex
- Half
- Supply voltage (Nom) (V)
- 5
- Signaling rate (Max) (Mbps)
- 30
- IEC 61000-4-2 contact (+/- kV)
- None
- Fault protection (V)
- -10 to 15
- Common mode range
- -7 to 12
- Number of nodes
- 32
- Isolated
- No
- ICC (Max) (mA)
- 20
- Rating
- Catalog
- Operating temperature range (C)
- 0 to 70
SN75LBC171的完整型号有：SN75LBC171DB，以下是这些产品的关键参数及官网采购报价：
SN75LBC171DB，工作温度：0 to 70，封装：SSOP (DB)-20，包装数量MPQ：70个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN75LBC171DB的批量USD价格：6.347（1000+）
SN65LBC171, SN75LBC171 IBIS Model DB PKG
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模拟仿真程序
TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。
TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。
如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表
需要 HSpice (...)
