The SN55LBC176, SN65LBC176, SN65LBC176Q, and SN75LBC176 differential bus transceivers are monolithic, integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. They are designed for balanced transmission lines and meet ANSI Standard TIA/EIA-485-A (RS-485) and ISO 8482:1987(E).

The SN55LBC176, SN65LBC176, SN65LBC176Q, and SN75LBC176 combine a 3-state, differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, which can externally connect together to function as a direction control. The driver differential outputs and the receiver differential inputs connect internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or V_CC = 0. This port features wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications. Very low device supply current can be achieved by disabling the driver and the receiver.

These transceivers are suitable for ANSI Standard TIA/EIA-485 (RS-485) and ISO 8482 applications to the extent that they are specified in the operating conditions and characteristics section of this data sheet. Certain limits contained in TIA/EIA-485-A and ISO 8482:1987 (E) are not met or cannot be tested over the entire military temperature range.

The SN55LBC176 is characterized for operation from –55°C to 125°C. The SN65LBC176 is characterized for operation from –40°C to 85°C, and the SN65LBC176Q is characterized for operation from –40°C to 125°C. The SN75LBC176 is characterized for operation from 0°C to 70°C.

• Bidirectional Transceiver
• Meets or Exceeds the Requirements of ANSI Standard TIA/EIA.485.A and ISO 8482:1987(E)
• High-Speed Low-Power LinBiCMOS? Circuitry
• Designed for High-Speed Operation in Both Serial and Parallel Applications
• Low Skew
• Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments
• Very Low Disabled Supply Current . . . 200 μA Maximum
• Wide Positive and Negative Input/Output Bus Voltage Ranges
• Thermal-Shutdown Protection
• Driver Positive-and Negative-Current Limiting
• Open-Circuit Failsafe Receiver Design
• Receiver Input Sensitivity . . . ±200 mV Max
• Receiver Input Hysteresis . . . 50 mV Typ
• Operates From a Single 5-V Supply
• Glitch-Free Power-Up and Power-Down Protection
• Available in Q-Temp Automotive HighRel Automotive ApplicationsConfiguration Control / Print Support Qualification to Automotive Standards

LinBiCMOS and LinASIC are trademarks of Texas Instruments Incorporated.

• Number of receivers
• 1
• Number of transmitters
• 1
• Duplex
• Half
• Supply voltage (Nom) (V)
• 5
• Signaling rate (Max) (Mbps)
• 10
• IEC 61000-4-2 contact (+/- kV)
• —
• Fault protection (V)
• -10 to 15
• Common mode range
• -7 to 12
• Number of nodes
• 32
• Isolated
• No
• ICC (Max) (mA)
• 1.5
• Rating
• Catalog
• Operating temperature range (C)
• 0 to 70

SN75LBC176的完整型号有：SN75LBC176D、SN75LBC176DR、SN75LBC176P，以下是这些产品的关键参数及官网采购报价：

SN75LBC176D，工作温度：0 to 70，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN75LBC176D的批量USD价格：1.251（1000+）

SN75LBC176DR，工作温度：0 to 70，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN75LBC176DR的批量USD价格：1.051（1000+）

SN75LBC176P，工作温度：0 to 70，封装：PDIP (P)-8，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：NIPDAU，TI官网SN75LBC176P的批量USD价格：1.702（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)