The SN75LV4737A consists of three line drivers, five line receivers, and a charge-pump circuit. It provides the electrical interface between an asynchronous communication controller and the serial-port connector, and meets the requirements of TIA/EIA-232-F. This combination of drivers and receivers matches those needed for the typical serial port used in an IBM PC/AT or compatibles. The charge pump and five small external capacitors allow operation from a single 3.3-V supply, and four capacitors allow operation from a 5-V supply.

The device has flexible control options for power management when the serial port is inactive. A common disable for all of the drivers and receivers is provided with the active-high STBY input. The active-low EN\ input is an enable for one receiver to implement a wake-up feature for the serial port. All the logic inputs can accept signals from controllers operating from a 5-V supply, even though the SN75LV4737A is operating from 3.3 V.

The SN75LV4737A is characterized for operation over the temperature range of 0°C to 70°C.

• Single-Chip and Single-Supply Interface for IBM PC/ATTM Serial Port
• Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.11 Standards
• Operates With 3.3-V or 5-V Supplies
• One Receiver Remains Active During Standby (Wake-up Mode)
• Designed to Operate at 128 kbit/s Over a 3-m Cable
• Low Standby Current...5 uA Max
• ESD Protection on RS-232 Pins Meets or Exceeds 4 kV (HBM) and 1.5 kV (HBM) on All Pins Per MIL-STD-883, Method 3015
• External Capacitors...0.1 uF
• (VCC = 3.3 V...Five External Capacitors)
• (VCC = 5 V...Four External Capacitors)
• Accepts 5-V Logic Input With 3.3-V Supply
• Applications
  • RS-232 Interface
  • Battery-Powered Systems, PDAs
  • Notebook, Laptop, and Palmtop PCs
  • External Modems and Hand-Held Terminals
• Packaged in Shrink Small-Outline Package

Patent-pending design

IBM and PC/AT are trademarks of International Business Machines Corporation.

• Drivers per package
• 3
• Receivers per package
• 5
• Logic voltage (Min) (V)
• 3.3
• Data rate (Max) (kbps)
• 128
• Main supply voltage (Nom) (V)
• 3.3, 5
• ESD HBM (kV)
• 4
• Rating
• Catalog
• Operating temperature range (C)
• 0 to 70
• Vout (Typ) (V)
• 5.5

SN75LV4737A的完整型号有：SN75LV4737ADB、SN75LV4737ADBR，以下是这些产品的关键参数及官网采购报价：

SN75LV4737ADB，工作温度：0 to 70，封装：SSOP (DB)-28，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN75LV4737ADB的批量USD价格：2.573（1000+）

SN75LV4737ADBR，工作温度：0 to 70，封装：SSOP (DB)-28，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SN75LV4737ADBR的批量USD价格：2.144（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)