The SN75LVCP600 is a versatile single channel, SATA Express signal conditioner supporting data rates up to 6 Gbps. The device supports SATA Gen 1, 2, and 3 specifications as well as PCIe 1.0, 2.0, and 3.0. The SN75LVCP600 operates from a single 3.3-V supply and has 100-Ω line termination with self-biasing feature, making the device suitable for AC coupling. The inputs incorporate an out-of-band (OOB) detector, which automatically squelches the output when the input differential voltage falls below threshold while maintaining a stable common-mode voltage. The device is also designed to handle spread spectrum clocking (SSC) transmission per SATA standard.

The SN75LVCP600 handles interconnect losses at its input with selectable equalization settings that can be programmed to match the loss in the channel. For data rates of 3 Gbps and lower the SN75LVCP600 equalizes signals for a span of up to 50 inches of FR4 board material. For data rates of 8 Gbps the device compensates up to 40 in of FR4 material. The equalization level is controlled by the setting of the signal control pin EQ.

Two de-emphasis levels can be selected on the transmit side to provide 0 dB or 1.2 dB of additional high-frequency loss compensation at the output.

The device is hot-plug capable⁽¹⁾ preventing device damage under device hot-insertion such as async signal plug and removal, unpowered plug and removal, powered plug and removal, or surprise plug and removal.

_{(1) Requires use of AC coupling capacitors at differential inputs and outputs.}

• SATA Express Support
• Selectable Equalization and De-Emphasis
• Hot Plug Capable
• Receiver Detect and OOB Support
• Multirate Operation: 1.5 Gbps, 3 Gbps, and 6 Gbps
• Suitable to Receive 6-Gbps Data Over Up to 40 Inches (1 Meter) of FR4
• Compensates Up to 14-dB Loss on the Receive Side and 1.2-dB Loss on the Transmit Side at 3 GHz
• Integrated Output Squelch
• Auto Low Power Feature Lowers Power by > 90%
  • < 100 mW (Active Mode, Typical)
  • < 11 mW (Auto Low Power Mode, Typical)
• Single 3.3-V Supply
• High Protection Against ESD Transient
  • HBM: 6 kV
  • CDM: 1.5 kV
• Ultra-Small Footprint: 2 mm × 2 mm WSON Package

• Type
• Redriver
• Protocols
• SAS1, SAS2, SATA1, SATA2
• Applications
• SATA, SAS
• Number of channels (#)
• 1
• Speed (Max) (Gbps)
• 6
• Supply voltage (V)
• 3.3
• Rating
• Catalog
• Operating temperature range (C)
• 0 to 85

SN75LVCP600的完整型号有：SN75LVCP600DRFR、SN75LVCP600DRFT，以下是这些产品的关键参数及官网采购报价：

SN75LVCP600DRFR，工作温度：0 to 85，封装：WSON (DRF)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN75LVCP600DRFR的批量USD价格：.88（1000+）

SN75LVCP600DRFT，工作温度：0 to 85，封装：WSON (DRF)-8，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN75LVCP600DRFT的批量USD价格：1.056（1000+）

SN75LVCP600SEVM — 用于 LVCP600S 的评估模块

SN75LVCP600SEVM 设计用于提供对 LVCP600S 的轻松评估。它还旨在作为参考设计，以显示如何在生产设计中设计器件的实际示例。EVM 接口包括 2 个标准 SATA 连接器。因此，要将 EVM 连接到您的系统设置，您很可能需要 2 条 标准 SATA 电缆（未随 EVM 提供）。

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)