This family of 4, 8, and 16 differential line drivers implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. Any of the 16 current-mode drivers will deliver a minimum differential output voltage magnitude of 247 mV into a 100-Ω load when enabled.

When disabled, the driver outputs are high-impedance. Each driver input (A) and enable (EN) have an internal pulldown that will drive the input to a low level when open-circuited.

The SN65LVDS387, SN65LVDS389, and SN65LVDS391 devices are characterized for operation from –40°C to 85°C. The SN75LVDS387, SN75LVDS389, and SN75LVDS391 devices are characterized for operation from 0°C to 70°C.

• Four (’391), Eight (’389), or Sixteen (’387) Line Drivers Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard
• Designed for Signaling Rates Up to 630?Mbps With Very Low Radiation (EMI)
• Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and a 100-Ω Load
• Propagation Delay Times Less Than 2.9 ns
• Output Skew Is Less Than 150 ps
• Part-to-Part Skew Is Less Than 1.5 ns
• 35-mW Total Power Dissipation in Each Driver Operating at 200 MHz
• Driver Is High-Impedance When Disabled or With VCC < 1.5 V
• SN65’ Version Bus-Pin ESD Protection Exceeds 15 kV
• Packaged in Thin Shrink Small-Outline Package With 20-mil Pin Pitch
• Low-Voltage TTL (LVTTL) Logic Inputs Are 5-V Tolerant

• Function
• Driver
• Protocols
• LVDS
• Number of transmitters
• 16
• Number of receivers
• 0
• Supply voltage (V)
• 3.3
• Signaling rate (Mbps)
• 630
• Input signal
• LVTTL
• Output signal
• LVDS
• Rating
• Catalog
• Operating temperature range (C)
• 0 to 70

SN75LVDS387的完整型号有：SN75LVDS387DGG、SN75LVDS387DGGR，以下是这些产品的关键参数及官网采购报价：

SN75LVDS387DGG，工作温度：0 to 70，封装：TSSOP (DGG)-64，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN75LVDS387DGG的批量USD价格：4.928（1000+）

SN75LVDS387DGGR，工作温度：0 to 70，封装：TSSOP (DGG)-64，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN75LVDS387DGGR的批量USD价格：4.224（1000+）

SN65LVDS387EVM — 16 通道 LVDS 驱动器评估模块

We have designed easy-to-use evaluation modules (EVM) forour 16-channel low-voltage differential signaling (LVDS) driver and receivers. Flexibility has been designed into these EVMs so they can be set up in a point-to-point topology (1 driver to 1 receiver) or a multidrop topology (1 driver (...)

SN65LVDS387, SN75LVDS387 IBIS Model (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)