The SN75LVPE4410 is a four channel low-power high-performance linear repeater/redriver designed to support PCI Express (PCIe) Generation 1.0, 2.0, 3.0 and 4.0.

The SN75LVPE4410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear datapaths of SN75LVPE4410 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol result in best electrical link and lowest possible latency. The programmable equalization of the device along with its linear datapaths maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance.

The programmable settings can be applied easily through software (SMBus or I²C) or by using pin control.

• Quad-channel linear equalizer supporting PCIe 1.0/2.0/3.0/4.0 up to 16 Gbps interfaces
• CTLE boosts up to 18 dB at 8 GHz helps to extend channel reach
• Automatic receiver detection for PCIe use cases
• Protocol agnostic linear redriver allows seamless support for PCIe link training
• Ultra-low latency of 70 ps (typical)
• Low additive random jitter of 60 fs (typical) with PRBS data
• Single 3.3-V supply
• Low active power of 124 mW/channel (typical) - no heat sink required
• Pin-strap or SMBus programming
• Support for x2, x4, x8, x16 PCIe bus width with one or multiple SN75LVPE4410
• Commercial temperature range of 0oC to 70oC
• 4.0 mm × 6.0 mm, 40 pin WQFN package

• Type
• Redriver
• Protocols
• PCIe1, PCIe2, PCIe3, PCIe4, SAS1, SAS2, SAS3, SATA1, SATA2, SATA3
• Applications
• PCIE, SAS, SATA
• Number of channels (#)
• 4
• Speed (Max) (Gbps)
• 16
• Supply voltage (V)
• 3.3
• Rating
• Catalog
• Operating temperature range (C)
• 0 to 70

SN75LVPE4410的完整型号有：SN75LVPE4410RNQR、SN75LVPE4410RNQT，以下是这些产品的关键参数及官网采购报价：

SN75LVPE4410RNQR，工作温度：0 to 70，封装：WQFN (RNQ)-40，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN75LVPE4410RNQR的批量USD价格：3.96（1000+）

SN75LVPE4410RNQT，工作温度：0 to 70，封装：WQFN (RNQ)-40，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网SN75LVPE4410RNQT的批量USD价格：4.752（1000+）

DS160PR410EVM-RSC — DS160PR410EVM-RSC

The DS160PR410EVM-RSC evaluation module (EVM) provides a complete high-bandwidth platform for evaluating the signal conditioning features of the Texas Instruments DS160PR410 PCI-Express linear redriver. It features eight DS160PR410 devices that can extend the transmission distance of a PCIe 4.0 (...)

DS160PR410EVM-SMA — DS160PR410EVM-SMA

Quad-channel PCI-express gen-4 linear redriver evaluation module (EVM)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)