The SRC4184 is a four-channel, asynchronous sample rate converter (ASRC), designed for professional and broadcast audio applications. The SRC4184 combines a wide input-to-output sampling ratio with outstanding dynamic range and ultra low distortion. The input and output serial ports support the most common audio data formats, as well as a time division multiplexed (TDM) format. This allows the SRC4184 to interface to a wide range of audio data converters, digital audio receivers and transmitters, and digital signal processors.

The SRC4184 may be operated in Hardware mode as a standalone pin-programmed device, with dedicated control pins for serial port mode, audio data format, soft mute, bypass, and digital filtering functions. Alternatively, the SRC4184 may be operated in Software mode, where a four-wire serial peripheral interface (SPI) port provides access to internal control and status registers.

The SRC4184 operates from either a +1.8V core supply or a +3.3V core supply. When operating from +3.3V, the +1.8V required by the core logic is derived from an internal voltage regulator. The SRC4184 also requires a digital I/O supply, which operates from +1.65V to +3.6V. The SRC4184 is available in a TQFP-64 package.

• AUTOMATIC SENSING OF INPUT-TO-OUTPUT SAMPLING RATIO
• WIDE INPUT-TO-OUTPUT SAMPLING RANGE: 16:1 to 1:16
• SUPPORTS INPUT AND OUTPUT SAMPLING RATES UP TO 212kHz
• DYNAMIC RANGE: 128dB (–60dbFS Input, BW = 20Hz to fs/2, A-Weighted)
• THD+N: –125dB (0dbFS Input, BW = 20Hz to fs/2)
• HIGH-PERFORMANCE, LINEAR PHASE DIGITAL FILTERING
• FLEXIBLE AUDIO SERIAL PORTS:
  • Master or Slave Mode Operation
  • Supports I2S, Left-Justified, Right-Justified, and TDM Data Formats
  • TDM Mode Allows Daisy-Chaining of Up to Four Devices
• SUPPORTS 24-, 20-, 18-, or 16-BIT INPUT AND OUTPUT DATA
  • All Output Data is Dithered from the Internal 28-Bit Data Path
• SERIAL PERIPHERAL INTERFACE (SPI)? PORT SUPPORTS REGISTER READ AND WRITE OPERATIONS IN SOFTWARE MODE
• BYPASS MODE
  • Routes Input Port Data Directly to the Output Port
• FOUR GROUP DELAY OPTIONS FOR THE INTERPOLATION FILTER
• DIRECT DOWNSAMPLING OPTION FOR THE DECIMATION FILTER
• DIGITAL DE-EMPHASIS FILTER
  • User-Selectable for 32kHz, 44.1kHz, and 48kHz Sampling Rates
• SOFT MUTE FUNCTION
• PROGRAMMABLE DIGITAL OUTPUT ATTENUATION (SOFTWARE MODE ONLY)
  • 256 Steps: 0dB to –127.5dB with 0.5dB Steps
• INPUT-TO-OUTPUT SAMPLING RATIO READBACK (SOFTWARE MODE ONLY)
• POWER-DOWN MODES
• SUPPORTS OPERATION FROM A SINGLE +1.8V or +3.3V POWER SUPPLY
• AVAILABLE IN A TQFP-64 PACKAGE
• APPLICATIONS
  • DIGITAL MIXING CONSOLES
  • DIGITAL AUDIO WORKSTATIONS
  • AUDIO DISTRIBUTION SYSTEMS
  • BROADCAST STUDIO EQUIPMENT
  • GENERAL DIGITAL AUDIO PROCESSING

U.S. Patent No. 7,262,716. All trademarks are the property of their respective owners.

• Number of SRC channels
• 4
• Digital audio interface
• I2S, R, L, TDM
• Dynamic range (dB)
• 128
• Digital supply (up to 5 V) (V)
• 1.65 - 2, 3 - 3.6
• THD+N (dB)
• -125
• Control mode
• SW (SPI)
• Power supply (V)
• 1.8, 3.3
• Control interface
• SPI
• Audio data format
• Normal, I2S, TDM
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

SRC4184的完整型号有：SRC4184IPAG、SRC4184IPAGR、SRC4184IPAGT，以下是这些产品的关键参数及官网采购报价：

SRC4184IPAG，工作温度：-40 to 85，封装：TQFP (PAG)-64，包装数量MPQ：160个，MSL 等级/回流焊峰值温度：Level-4-260C-72 HR，引脚镀层/焊球材料：NIPDAU，TI官网SRC4184IPAG的批量USD价格：8.226（1000+）

SRC4184IPAGR，工作温度：-40 to 85，封装：TQFP (PAG)-64，包装数量MPQ：1500个，MSL 等级/回流焊峰值温度：Level-4-260C-72 HR，引脚镀层/焊球材料：NIPDAU，TI官网SRC4184IPAGR的批量USD价格：6.855（1000+）

SRC4184IPAGT，工作温度：-40 to 85，封装：TQFP (PAG)-64，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-4-260C-72 HR，引脚镀层/焊球材料：NIPDAU，TI官网SRC4184IPAGT的批量USD价格：8.226（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)