The SRC4192 and SRC4193 devices are asynchronous, sample-rate converters designed for professional and broadcast audio applications. The SRC4192 and SRC4193 devices combine a wide input-to-output sampling ratio with outstanding dynamic range and ultra-low distortion. Input and output serial ports support standard audio formats, as well as a Time Division Multiplexed (TDM) mode. Flexible audio interfaces allow the SRC4192 and SRC4193 devices to connect to a wide range of audio data converters, digital audio receivers and transmitters, and digital signal processors.

The SRC4192 device is a standalone, pin-programmed device, with control pins for mode, data format, mute, bypass, and low group-delay functions. The SRC4193 device is a software-controlled device featuring a serial peripheral interface (SPI) port, which is utilized to program all functions through the internal control registers.

The SRC4192 and SRC4193 devices can operate from a single 3.3-V power supply. A separate digital I/O supply (V_IO) operates over the 1.65-V to 3.6-V supply range, allowing greater flexibility when interfacing to current and future generation signal processors and logic devices. Both devices are available in a 28-pin SSOP package.

• Automatic Sensing of the Input-to-Output Sampling Ratio
• Wide Input-to-Output Sampling Range: 16:1 to 1:16
• Supports Input and Output Sampling Rates Up to 212 kHz
• Dynamic Range: 144 dB (–60-dbFS Input, BW = 20 Hz to fS/2, A-Weighted)
• THD+N: –140 dB (0-dbFS Input, BW = 20 Hz to fS/2)
• Attenuates Sampling and Reference Clock Jitter
• High-Performance, Linear-Phase Digital Filtering with Stop Band Attenuation Greater than 140 dB
• Flexible Audio Serial Ports:
  • Master or Slave-Mode Operation
  • Supports I2S, Left-Justified, Right-Justified, and TDM Data Formats
  • Supports 16, 18, 20, or 24-Bit Audio Data
  • TDM Mode Allows Daisy-Chaining of up to Eight Devices
• Supports 24-, 20-, 18-, or 16-Bit Input and Output Data: All Output Data is Dithered from the Internal 28-Bit Data Path
• Low Group Delay Option for Interpolation Filter
• Direct Downsampling Option for Decimation Filter (SRC4193 Only)
• SPI Port Provides Access to Internal Control Registers (SRC4193 Only)
• Soft Mute Function
• Bypass Mode
• Programmable Digital Output Attenuation (SRC4193 Only); 256 Steps: 0 dB to –127.5 dB, 0.5-dB/step
• Power Down Mode
• Operates From a Single 3.3-V Power Supply
• Small 28-Pin SSOP Package
• Pin Compatible with the AD1896 (SRC4192 Only)

• Number of SRC channels
• 2
• Digital audio interface
• I2S, R, L, TDM
• Dynamic range (dB)
• 144
• Digital supply (up to 5 V) (V)
• 3 - 3.6
• THD+N (dB)
• -140
• Control mode
• SW (SPI)
• Power supply (V)
• 3.3
• Control interface
• SPI
• Audio data format
• Normal, I2S, TDM
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

SRC4193的完整型号有：SRC4193IDB、SRC4193IDBR，以下是这些产品的关键参数及官网采购报价：

SRC4193IDB，工作温度：-40 to 85，封装：SSOP (DB)-28，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SRC4193IDB的批量USD价格：6.645（1000+）

SRC4193IDBR，工作温度：-40 to 85，封装：SSOP (DB)-28，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网SRC4193IDBR的批量USD价格：5.537（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)