The TAS5102/TAS5103 are integrated stereo digital amplifier power stages with an advanced protection system. The TAS5102/TAS5103 are capable of driving an 8-Ω bridge-tied load (BTL) at up to 20 W/15 W per channel with low integrated noise at the output, low THD+N performance, and low idle power dissipation.

A low-cost, high-fidelity audio system can be built using a TI chipset, comprising a modulator (e.g., TAS5086) and the TAS5102/TAS5103. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency audio amplification with proven EMI compliance. These devices require two power supplies, at 3.3 V for VREG, and up to 23 V for PVDD. The TAS5102/TAS5103 does not require power-up sequencing due to internal power-on reset. The efficiency of this digital amplifier is greater than 90% into 8 Ω, which enables the use of smaller power supplies and heatsinks.

The TAS5102/3 has an innovative protection system integrated on chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The TAS5102/TAS5103 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level music transients.

• 2×20 W at 10% THD+N Into 8-Ω BTL at 18 V (With Heatsink for TAS5102)
• 2×15 W at 10% THD+N Into 8-Ω BTL at 15.5 V for TAS5103
• 2×10 W at 10% THD+N Into 8-Ω BTL at 13 V
• >100-dB SNR (A-Weighted)
• <0.1% THD+N at 1 W
• Thermally Enhanced Package: 32-pin HTSSOP
  • DAD (TAS5102) Pad Up
  • DAP (TAS5103) Pad Down
• High-Efficiency Power Stage (>90%) With 180-Ω Output MOSFETs
• Wide PVDD Range from 8V to 23V
• Power-On Reset for Protection on Power Up Without Any Power-Supply Sequencing
• Integrated Self-Protection Circuits Including Undervoltage, Overtemperature, Overcurrent, Short Circuit
• Built-In Regulator for Gate Drive Supply
• Error Reporting
• EMI Compliant When Used With Recommended System Design
• APPLICATIONS
  • Televisions
  • Mini/Micro Audio Systems
  • DVD Receivers
  • Home Theaters

• Audio input type
• PWM
• Architecture
• Class-D
• Speaker channels (Max)
• 4
• Power stage supply (Max) (V)
• 23
• Power stage supply (Min) (V)
• 8
• Load (Min) (ohms)
• 4
• Output power (W)
• 20
• SNR (dB)
• 100
• THD + N @ 1 kHz (%)
• 0.1
• Iq (Typ) (mA)
• 0.01
• Control interface
• Hardware
• Closed/open loop
• Open
• Analog supply (Min) (V)
• 3
• Analog supply (Max) (V)
• 3.6
• Operating temperature range (C)
• 0 to 70

TAS5103的完整型号有：TAS5103DAP、TAS5103DAPR，以下是这些产品的关键参数及官网采购报价：

TAS5103DAP，工作温度：0 to 70，封装：HTSSOP (DAP)-32，包装数量MPQ：46个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5103DAP的批量USD价格：2.772（1000+）

TAS5103DAPR，工作温度：0 to 70，封装：HTSSOP (DAP)-32，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5103DAPR的批量USD价格：2.376（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)