The TAS5631B is a high-performance PWM input class-D amplifier with integrated closed-loop feedback technology (known as PurePath HD technology) with the ability to drive up to 300 W ⁽¹⁾ stereo into 4-Ω to 8-Ω speakers from a single 50-V supply.

PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.

Unlike traditional class-D amplifiers, the distortion curve does not increase until the output levels move into clipping.

PurePath HD technology enables lower idle losses, making the device even more efficient.

• PurePath? HD Enabled Integrated Feedback Provides:
  • Signal Bandwidth up to 80 kHz for High-Frequency Content From HD Sources
  • Ultralow 0.03% THD at 1 W Into 4 Ω
  • Flat THD at All Frequencies for Natural Sound
  • 80-dB PSRR (BTL, No Input Signal)
  • >100-dB (A-weighted) SNR
  • Click- and Pop-Free Start-Up
• Multiple Configurations Possible on the Same PCB With Stuffing Options:
  • Mono Parallel Bridge-Tied Load (PBTL)
  • Stereo Bridge-Tied Load (BTL)
  • 2.1 Single-Ended Stereo Pair and Bridge-Tied Load Subwoofer
  • Quad Single-Ended Outputs
• Total Output Power at 10% THD+N
  • 400 W per Channel in Mono PBTL Configuration
  • 300 W per Channel in Stereo BTL Configuration
  • 145 W per Channel in Quad Single-Ended Configuration
• High-Efficiency Power Stage (>88%) With 60-mΩ Output MOSFETs
• Two Thermally Enhanced Package Options:
  • PHD (64-Pin QFP)
  • DKD (44-Pin PSOP3)
• Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and Short-Circuit Protection) With Error Reporting
• EMI Compliant When Used With Recommended System Design
• APPLICATIONS
  • Mini Combo System
  • AV Receivers
  • DVD Receivers
  • Active Speakers

All other trademarks are the property of their respective owners

• Audio input type
• PWM
• Architecture
• Class-D
• Speaker channels (Max)
• 4
• Power stage supply (Max) (V)
• 52.5
• Power stage supply (Min) (V)
• 25
• Load (Min) (ohms)
• 4
• Output power (W)
• 300
• SNR (dB)
• 103
• THD + N @ 1 kHz (%)
• 0.03
• Iq (Typ) (mA)
• 24.8
• Control interface
• Hardware
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 10.8
• Analog supply (Max) (V)
• 13.2
• PSRR (dB)
• 80
• Operating temperature range (C)
• 0 to 70

TAS5631B的完整型号有：TAS5631BPHD、TAS5631BPHDR、TAS5631BDKD、TAS5631BDKDR，以下是这些产品的关键参数及官网采购报价：

TAS5631BPHD，工作温度：0 to 70，封装：HTQFP (PHD)-64，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-4-260C-72 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5631BPHD的批量USD价格：7.926（1000+）

TAS5631BPHDR，工作温度：0 to 70，封装：HTQFP (PHD)-64，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-4-260C-72 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5631BPHDR的批量USD价格：6.605（1000+）

TAS5631BDKD，工作温度：0 to 70，封装：HSSOP (DKD)-44，包装数量MPQ：29个，MSL 等级/回流焊峰值温度：Level-4-260C-72 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5631BDKD的批量USD价格：11.05（1000+）

TAS5631BDKDR，工作温度：0 to 70，封装：HSSOP (DKD)-44，包装数量MPQ：500个，MSL 等级/回流焊峰值温度：Level-4-260C-72 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5631BDKDR的批量USD价格：9.489（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)