The TAS5704 is a 20-W, efficient, digital audio power amplifier for driving stereo bridge-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors accepting a wide range of input data and clock rates. A hardware configurable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer PWM outputs.

The TAS5704 is a slave-only device receiving all clocks from external sources. The TAS5704 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20  kHz.

The closed-loop architecture of the TAS5704 provides several benefits. The high power supply rejection enables superior audio performance from a noisy, low cost supply. The high damping factor allows tighter control over speaker movement resulting in an improved bass response. Finally, switching edge rate control lowers EMC emissions without sacrificing audio performance.

• Audio Input/Output
  • 20-W into an 8- Load From an 18-V Supply
  • Two Serial Audio Inputs (Four Audio Channels)
  • Supports Multiple Output Configurations:
    • 2-Ch Bridged Outputs (20 W × 2)
    • 4-Ch Single-Ended Outputs (10 W × 4)
    • 2-Ch Single-Ended + 1-Ch Bridged (2.1) (10 W × 2 + 20 W)
• Closed Loop Power Stage Architecture
  • Improved PSRR Reduces Power Supply Performance Requirements
  • Higher Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
  • Lower EMC Emissions
  • Output Power is Independent of Supply Voltage Variation
• Wide PVCC Range From (10V to 26V)
• Supports 32-kHz–192-kHz (DVD-Audio) Sample Rates (LJ/RJ/I2S)
• Line-Level Subwoofer PWM Outputs
• Audio/PWM Processing (Hardware Controlled)
  • 4-Step Gain Control (-3dB, 3dB, 9dB, 12dB)
  • Soft Mute Control (50% Output Duty Cycle)
• Factory-Trimmed Internal Oscillator Enables Automatic Detection of Incoming Sample Rates
• Thermal and Short-Circuit Protection

System Two, Audio Precision are trademarks of Audio Precision, Inc.

• Audio input type
• Digital Input
• Architecture
• Class-D
• Speaker channels (Max)
• 4
• Power stage supply (Max) (V)
• 26
• Power stage supply (Min) (V)
• 10
• Load (Min) (ohms)
• 4
• Output power (W)
• 20
• SNR (dB)
• 100
• THD + N @ 1 kHz (%)
• 0.05
• Iq (Typ) (mA)
• 33
• Control interface
• Hardware
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 3
• Analog supply (Max) (V)
• 3.6
• Sampling rate (Max) (kHz)
• 192
• PSRR (dB)
• 60
• Operating temperature range (C)
• 0 to 85

TAS5704的完整型号有：TAS5704PAP、TAS5704PAPR，以下是这些产品的关键参数及官网采购报价：

TAS5704PAP，工作温度：0 to 85，封装：HTQFP (PAP)-64，包装数量MPQ：160个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5704PAP的批量USD价格：5.94（1000+）

TAS5704PAPR，工作温度：0 to 85，封装：HTQFP (PAP)-64，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5704PAPR的批量USD价格：5.026（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)