The TAS5706A/B is a 20-W, efficient, digital audio power amplifier for driving stereo bridged-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors and MPEG decoders, accepting a wide range of input data and clock rates. A fully programmable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer or headphone PWM outputs.

The TAS5706A/B is a slave-only device receiving all clocks from external sources. The TAS5706A/B operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

• Audio Input/Output
  • 20-W into an 8- Load From an 18-V Supply
  • Two Serial Audio Inputs (Four Audio Channels)
• TAS5706A Supports:
  • 2-Ch Bridged Outputs (20 W × 2)
• TAS5706B Supports:
  • 2-Ch Bridged Outputs (20 W × 2)
  • 4-Ch Single-Ended Outputs (10 W × 4)
  • 2-Ch Single-Ended + 1-Ch Bridged (2.1 Mode) (10 W × 2 + 20 W)
• Supports 32-kHz-192-kHz Sample Rates (LJ/RJ/I2S)
• Closed Loop Power Stage Architecture
  • Improved PSRR Reduces Power Supply Performance Requirements
  • Higher Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
  • Constant Output Power Over Variation in Supply
• Wide PVCC Range From (10 V to 26 V)
  • No Separate Supply Required for Gate Drive
• Headphone PWM Outputs
• Subwoofer PWM Outputs
• AM Interference Avoidance Support
• Audio/PWM Processing
  • Independent Channel Volume Controls With 48-dB to -79-dB Range—Soft Mute (50% Duty Cycle)
  • Programmable Dynamic Range Control
  • 7 Programmable Biquads for Speaker Equalization for Left and Right Channels
  • 4 Programmable Biquads for Bass Processing
  • Adaptive Biquad Coefficients for EQ and DRC Filters
  • Programmable Input and Output Mixers
  • Automatic Sample-Rate Detection and Coefficient Banking
• General Features
  • Serial Control Interface Operational Without MCLK
  • Factory-Trimmed Internal Oscillator Avoids the Need for External Crystal
  • Surface Mount, 64-Terminal, 10-mm × 10-mm HTQFP Package
  • Thermal and Short-Circuit Protection

All trademarks are the property of their respective owners.

• Audio input type
• Digital Input
• Architecture
• Class-D
• Speaker channels (Max)
• 4
• Power stage supply (Max) (V)
• 26
• Power stage supply (Min) (V)
• 10
• Load (Min) (ohms)
• 4
• Output power (W)
• 20
• SNR (dB)
• 99
• THD + N @ 1 kHz (%)
• 0.05
• Iq (Typ) (mA)
• 33
• Control interface
• Hardware, Software
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 3
• Analog supply (Max) (V)
• 3.6
• Sampling rate (Max) (kHz)
• 192
• PSRR (dB)
• 60
• Operating temperature range (C)
• 0 to 85

TAS5706B的完整型号有：TAS5706BPAP、TAS5706BPAPR，以下是这些产品的关键参数及官网采购报价：

TAS5706BPAP，工作温度：0 to 85，封装：HTQFP (PAP)-64，包装数量MPQ：160个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5706BPAP的批量USD价格：5.94（1000+）

TAS5706BPAPR，工作温度：0 to 85，封装：HTQFP (PAP)-64，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5706BPAPR的批量USD价格：5.026（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)