- 制造厂商:TI
- 产品类别:音频
- 技术类目:音频放大器 - 扬声器放大器
- 功能描述:具有集成无电容耳机的 10W 立体声、4.5V 至 26V、数字输入开环 D 类放大器
- 点击这里打开及下载TAS5717的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The TAS5717/TAS5719 is a 10-W/15-W, efficient, digital audio-power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.
The TAS5717/9 is a slave-only device receiving all clocks from external sources. The TAS5717/TAS5719 operates with a PWM carrier between a 384-kHz switching rate and a 352-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.
- Audio Input/Output
- TAS5717 Supports 2×10 W and TAS5719 Supports 2×15 W Output
- Wide PVDD Range, From 4.5 V to 26 V
- Efficient Class-D Operation Eliminates Need for Heatsinks
- Requires Only 3.3 V and PVDD
- One Serial Audio Input (Two Audio Channels)
- I2C Address Selection via PIN (Chip Select)
- Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
- External Headphone-Amplifier Shutdown Signal
- Integrated CAP-Free Headphone Amplifier
- Stereo Headphone (Stereo 2-V RMS Line Driver) Outputs
- Audio/PWM Processing
- Independent Channel Volume Controls With 24-dB to Mute
- Programmable Two-Band Dynamic Range Control
- 14 Programmable Biquads for Speaker EQ
- Programmable Coefficients for DRC Filters
- DC Blocking Filters
- 0.125-dB Fine Volume Support
- General Features
- Serial Control Interface Operational Without MCLK
- Factory-Trimmed Internal Oscillator for Automatic Rate Detection
- Surface Mount, 48-Pin, 7-mm × 7-mm HTQFP Package
- AD, BD, and Ternary PWM-Mode Support
- Thermal and Short-Circuit Protection
- Benefits
- EQ: Speaker Equalization Improves Audio Performance
- DRC: Dynamic Range Compression. Can Be Used As Power Limiter. Enables Speaker Protection, Easy Listening, Night-Mode Listening
- DirectPath Technology: Eliminates Bulky DC Blocking Capacitors
- Stereo Headphone/Stereo Line Drivers: Adjust Gain via External Resistors, Dedicated Active Headpone Mute Pin, High Signal-to-Noise Ratio
- Two-Band DRC: Set Two Different Thresholds for Low- and High-Frequency Content
FilterPro is a trademark of Texas Instruments.
- Audio input type
- Digital Input
- Architecture
- Class-D
- Speaker channels (Max)
- Stereo
- Power stage supply (Max) (V)
- 26
- Power stage supply (Min) (V)
- 4.5
- Load (Min) (ohms)
- 4
- Output power (W)
- 30
- SNR (dB)
- 105
- THD + N @ 1 kHz (%)
- 0.13
- Iq (Typ) (mA)
- 48
- Control interface
- Software
- Closed/open loop
- Open
- Analog supply (Min) (V)
- 3
- Analog supply (Max) (V)
- 3.6
- Sampling rate (Max) (kHz)
- 48
- Operating temperature range (C)
- 0 to 85
TAS5717的完整型号有:TAS5717PHP、TAS5717PHPR,以下是这些产品的关键参数及官网采购报价:
TAS5717PHP,工作温度:0 to 85,封装:HTQFP (PHP)-48,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:NIPDAU,TI官网TAS5717PHP的批量USD价格:2.965(1000+)
TAS5717PHPR,工作温度:0 to 85,封装:HTQFP (PHP)-48,包装数量MPQ:1000个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:NIPDAU,TI官网TAS5717PHPR的批量USD价格:2.471(1000+)
TAS5717EVM — TAS5717EVM 评估模块
TAS5717EVM 评估模块可演示 TAS5717PHP 的功能。TAS5717 综合了 10W 立体声 D 类音频功率放大器与 TI 专利 DirectPath 地居中耳机。该 EVM 和附带的材料使用户可以使用双频带 DRC、可编程 EQ、数字 THD 管理器进行试验,以及作为 2Vrms 线路驱动器或 40mW 耳机配置地居中输出路径。有关 TAS5717 功能的详细信息,请参阅 TI.com 上提供的数据表。
TAS571XSW-LINUX — 适用于 TAS571X 的 Linux 驱动程序
Linux 驱动程序支持 TAS571x 系列数字输入立体声放大器。Linux 驱动程序支持通过 I2C 总线和接口与 Linux DAI(数字音频接口)进行通信。Linux 主线状态
在 Linux 主线中提供:是
可通过 git.ti.com 获取:不适用
- tas5711
- tas5717
- tas5719
- tas5721
与该器件关联的文件为:
源文件 (...)
TAS57X_v3.2_Build_7 GUI Setup (Rev. B)
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)