The TAS5717/TAS5719 is a 10-W/15-W, efficient, digital audio-power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.

The TAS5717/9 is a slave-only device receiving all clocks from external sources. The TAS5717/TAS5719 operates with a PWM carrier between a 384-kHz switching rate and a 352-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

• Audio Input/Output
  • TAS5717 Supports 2×10 W and TAS5719 Supports 2×15 W Output
  • Wide PVDD Range, From 4.5 V to 26 V
  • Efficient Class-D Operation Eliminates Need for Heatsinks
  • Requires Only 3.3 V and PVDD
  • One Serial Audio Input (Two Audio Channels)
  • I2C Address Selection via PIN (Chip Select)
  • Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
  • External Headphone-Amplifier Shutdown Signal
  • Integrated CAP-Free Headphone Amplifier
  • Stereo Headphone (Stereo 2-V RMS Line Driver) Outputs
• Audio/PWM Processing
  • Independent Channel Volume Controls With 24-dB to Mute
  • Programmable Two-Band Dynamic Range Control
  • 14 Programmable Biquads for Speaker EQ
  • Programmable Coefficients for DRC Filters
  • DC Blocking Filters
  • 0.125-dB Fine Volume Support
• General Features
  • Serial Control Interface Operational Without MCLK
  • Factory-Trimmed Internal Oscillator for Automatic Rate Detection
  • Surface Mount, 48-Pin, 7-mm × 7-mm HTQFP Package
  • AD, BD, and Ternary PWM-Mode Support
  • Thermal and Short-Circuit Protection
• Benefits
  • EQ: Speaker Equalization Improves Audio Performance
  • DRC: Dynamic Range Compression. Can Be Used As Power Limiter. Enables Speaker Protection, Easy Listening, Night-Mode Listening
  • DirectPath Technology: Eliminates Bulky DC Blocking Capacitors
  • Stereo Headphone/Stereo Line Drivers: Adjust Gain via External Resistors, Dedicated Active Headpone Mute Pin, High Signal-to-Noise Ratio
  • Two-Band DRC: Set Two Different Thresholds for Low- and High-Frequency Content

FilterPro is a trademark of Texas Instruments.

• Audio input type
• Digital Input
• Architecture
• Class-D
• Speaker channels (Max)
• Stereo
• Power stage supply (Max) (V)
• 26
• Power stage supply (Min) (V)
• 4.5
• Load (Min) (ohms)
• 4
• Output power (W)
• 15
• SNR (dB)
• 105
• THD + N @ 1 kHz (%)
• 0.13
• Iq (Typ) (mA)
• 26
• Control interface
• Software
• Closed/open loop
• Open
• Analog supply (Min) (V)
• 3
• Analog supply (Max) (V)
• 3.6
• Sampling rate (Max) (kHz)
• 48
• Operating temperature range (C)
• 0 to 85

TAS5719的完整型号有：TAS5719PHP、TAS5719PHPR，以下是这些产品的关键参数及官网采购报价：

TAS5719PHP，工作温度：0 to 85，封装：HTQFP (PHP)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5719PHP的批量USD价格：3.067（1000+）

TAS5719PHPR，工作温度：0 to 85，封装：HTQFP (PHP)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5719PHPR的批量USD价格：2.556（1000+）

TAS571XSW-LINUX — 适用于 TAS571X 的 Linux 驱动程序

Linux 驱动程序支持 TAS571x 系列数字输入立体声放大器。Linux 驱动程序支持通过 I2C 总线和接口与 Linux DAI（数字音频接口）进行通信。
Linux 主线状态

在 Linux 主线中提供：是
可通过 git.ti.com 获取：不适用

支持的器件：

• tas5711
• tas5717
• tas5719
• tas5721

Linux 源文件

与该器件关联的文件为：

sound/soc/codecs/tas571x.c

Documentation/devicetree/bindings/sound/tas571x.txt

sound/soc/codecs/tas571x.h

源文件 (...)

TAS57X_v3.2_Build_7 GUI Setup (Rev. B)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)