The TAS5754M device is a high-performance, stereo closed-loop amplifier with integrated audio processor with PurePath? HybridFlow architecture. To convert from digital to analog, it uses a high performance DAC with Burr-Brown mixed signal heritage. It requires only two power supplies: one DVDD for low-voltage circuitry and one PVDD for high-voltage circuitry. It is controlled via a software control port using standard I2C communication. In the family, the TAS5756M uses traditional BD modulation, ensuring low distortion characteristics. The TAS5754M uses 1SPW modulation, reducing the idle current draw at the expense of slightly higher distortion.

The unique HybridFlow architecture allows the system designer to choose from several configurable DSP programs, specifically designed for use in popular audio end equipment like Bluetooth (BT) Speakers, Sound Bars, Docking Stations, Subwoofers. This combines the flexibility of a fully programmable device with the fast download time and ease of use of a fixed function ROM device.

An optimal mix of thermal performance and device cost is provided in the 90 mΩ r_DS(ON) of the output MOSFETs. Additionally, a thermally enhanced 48-Terminal TSSOP provides excellent operation in the elevated ambient temperatures found in modern consumer electronic devices.

For all available

• Flexible Audio I/O Configuration
  • Supports I2S, TDM, LJ, RJ Digital Input
  • 8 kHz to 192 kHz Sample Rate Support
  • Stereo Bridge Tied Load (BTL) or Mono Parallel Bridge Tied Load (PBTL) Operation
  • BD Modulation with TAS5756M, 1SPW Modulation with TAS5754M
  • Supports 3-Wire Digital Audio Interface (No MCLK required)
• High Performance Closed-Loop Architecture (PVDD = 12V, RSPK = 8 Ω, SPK_GAIN = 20dBV)
  • Idle Channel Noise = 62 μVrms (A-Wtd)
  • THD+N = 0.007 % (at 1 W, 1 kHz)
  • SNR = 103 A-Wtd (Ref. to THD+N = 1%)
• PurePath HybridFlow Processing Architecture
  • Several Configurable MiniDSP Programs (called HybridFlows)
  • Download Time <100 ms (typ)
  • Advanced Audio Processing Algorithms
• Communication Features
  • Software Mode Control via I2C Port
  • Two Address Select Pins – Up to 4 Devices
• Robustness and Reliability Features
  • Clock Error, DC, and Short-Circuit Protection
  • Over Temperature and Overcurrent Protection

• Audio input type
• Digital Input
• Architecture
• Class-D
• Speaker channels (Max)
• Stereo
• Power stage supply (Max) (V)
• 26.4
• Power stage supply (Min) (V)
• 4.5
• Load (Min) (ohms)
• 2
• Output power (W)
• 40
• SNR (dB)
• 103
• THD + N @ 1 kHz (%)
• 0.007
• Iq (Typ) (mA)
• 56
• Control interface
• Software
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 2.9
• Analog supply (Max) (V)
• 3.63
• Sampling rate (Max) (kHz)
• 192
• Operating temperature range (C)
• -25 to 85

TAS5754M的完整型号有：TAS5754MDCA、TAS5754MDCAR，以下是这些产品的关键参数及官网采购报价：

TAS5754MDCA，工作温度：-25 to 85，封装：HTSSOP (DCA)-48，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5754MDCA的批量USD价格：1.98（1000+）

TAS5754MDCAR，工作温度：-25 to 85，封装：HTSSOP (DCA)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TAS5754MDCAR的批量USD价格：1.65（1000+）

TAS5754MDCAEVM — TAS5754M I2S 输入闭环音频放大器评估模块

通过 TAS5754MDCAEVM，可以利用包含 TI 独特的 HybridFlow 架构的板载音频处理器评估 TAS5754M I2S 输入闭环放大器。它装配了两个 TAS5754MDCA 器件：一个配置用于双声道（立体声）运行，另一个配置用于单声道运行。它在 4.5V 至 26.4V 的单电源下运行，能够在 BTL 模式下输出高于 30W 的功率，在 PBTL 模式下输出高于 60W 的功率。与 PurePath™ 控制台母板（PurePath-CMBEVM – 必须单独订购）和 PurePath™ 控制台 GUI（PurePathConsole – (...)

PUREPATHCONSOLE — 适用于音频系统设计和开发的 PurePath 控制台图形开发套件

PurePath 控制台是一个高度集成且易于使用的音频开发套件，专门用于简化与音频产品开发相关的评估、配置和调试过程。观看视频，了解如何轻松使用 PurePath Console 3 软件。
PurePath 控制台的直观图形界面使音频设计非常直接，因为无需高级音频设计专业知识。以缩短生产开发时间为目的的易用图形界面中提供了许多 PurePath 控制台高级控制功能，这些功能有助于实现高度优化的音频性能、超低功耗和无缝系统集成。

支持的器件：

PurePath Console 1：PCM5142、TAS5721、TAS5729MD、TAS5731 和 TAS5760xx
(...)

TAS57XXM IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)