The THS5651A is a 10-bit resolution digital-to-analog converter (DAC) specifically optimized for digital data transmission in wired and wireless communication systems. The 10-bit DAC is a member of the CommsDAC series of high-speed, low-power CMOS digital-to-analog converters. The CommsDAC family consists of pin compatible 14-, 12-, 10-, and 8-bit DACs. All devices offer identical interface options, small outline package and pinout. The THS5651A offers superior ac and dc performance while supporting update rates up to 125 MSPS.

The THS5651A operates from an analog supply of 4.5 V to 5.5 V. Its inherent low power dissipation of 175 mW ensures that the device is well suited for portable and low-power applications. Lowering the full-scale current output reduces the power dissipation without significantly degrading performance. The device features a SLEEP mode, which reduces the standby power to approximately 25 mW, thereby optimizing the power consumption for system needs.

The THS5651A is manufactured in Texas Instruments advanced high-speed mixed-signal CMOS process. A current-source-array architecture combined with simultaneous switching shows excellent dynamic performance. On-chip edge-triggered input latches and a 1.2 V temperature compensated bandgap reference provide a complete monolithic DAC solution. The digital supply range of 3 V to 5.5 V supports 3 V and 5 V CMOS logic families. Minimum data input setup and hold times allow for easy interfacing with external logic. The THS5651A supports both a straight binary and twos complement input word format, enabling flexible interfacing with digital signal processors.

The THS5651A provides a nominal full-scale differential output current of 20 mA and > 300 k output impedance, supporting both single-ended and differential applications. The output current can be directly fed to the load (e.g., external resistor load or transformer), with no additional external output buffer required. An accurate on-chip reference and control amplifier allows the user to adjust this output current from 20 mA down to 2 mA, with no significant degradation of performance. This reduces power consumption and provides 20 dB gain range control capabilities. Alternatively, an external reference voltage and control amplifier may be applied in applications using a multiplying DAC. The output voltage compliance range is 1.25 V.

The THS5651A is available in both a 28-pin SOIC and TSSOP package. The device is characterized for operation over the industrial temperature range of –40°C to 85°C.

• Member of the Pin-Compatible CommsDAC? Product Family
• 125 MSPS Update Rate
• 10-Bit Resolution
• Superior Spurious Free Dynamic Range Performance (SFDR) to Nyquist at 40 MHz Output: 62 dBc
• 1 ns Setup/Hold Time
• Differential Scalable Current Outputs: 2 mA to 20 mA
• On-Chip 1.2-V Reference
• 3 V and 5 V CMOS-Compatible Digital Interface
• Straight Binary or Twos Complement Input
• Power Dissipation: 175 mW at 5 V, Sleep Mode: 25 mW at 5 V
• Package: 28-Pin SOIC and TSSOP

CommsDAC is a trademark of Texas Instruments Incorporated.

• Resolution (Bits)
• 10
• Number of DAC channels (#)
• 1
• Interface type
• Parallel CMOS
• Sample/update rate (MSPS)
• 125
• Features
• Low Power
• Rating
• Catalog
• Interpolation
• 1x
• Power consumption (Typ) (mW)
• 175
• SFDR (dB)
• 79
• Architecture
• Current Source
• Operating temperature range (C)
• -40 to 85
• Reference type
• Ext, Int

THS5651A的完整型号有：THS5651AIDW、THS5651AIDWR、THS5651AIPW、THS5651AIPWR，以下是这些产品的关键参数及官网采购报价：

THS5651AIDW，工作温度：-40 to 85，封装：SOIC (DW)-28，包装数量MPQ：20个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网THS5651AIDW的批量USD价格：5.889（1000+）

THS5651AIDWR，工作温度：-40 to 85，封装：SOIC (DW)-28，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网THS5651AIDWR的批量USD价格：4.983（1000+）

THS5651AIPW，工作温度：-40 to 85，封装：TSSOP (PW)-28，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网THS5651AIPW的批量USD价格：5.889（1000+）

THS5651AIPWR，工作温度：-40 to 85，封装：TSSOP (PW)-28，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网THS5651AIPWR的批量USD价格：4.983（1000+）

THS5651EVM — THS5651A 评估模块

The THS56x1 evaluation module (EVM) allows the user to easily evaluate the THS56x1A CommsDAC family. The THS56x1A family features 125 MSPS update rate and is specifically optimized for use in high-speed digital communication applications. The CommsDAC family consists of the pin-compatible 8-bit (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

MATCHGAIN-CALC — Wideband Comp Current Output DAC to SE Interface: Impr Matching for Gain & Compliance Volt Swing

NOTE: Calculator software is available when downloading the application note.

• Click on "abstract" to view abstract of document.
• Open the ZIP file to extract the calculator tool.
• Open the PDF file to view the application note.

---

High-speed digital-to-analog converters (DACs) most often use a (...)